Polymer flooding has been applied for petroleum recovery and the main results of this method are the effective increasing in oil production and the reduction of water circulation The objective of this work is to present a methodology for pre-selecting a polymer to be used in future research on enhanced oil recovery (EOR) by injecting polymer solution. A reservoir was selected and characterized. Seven samples of commercial partially hydrolyzed polyacrylamide (PHPA) were also selected and characterized. Polymer solutions were prepared and characterized in terms of filterability, viscosity, stability (under reservoir conditions) and mechanical degradation. Polymer-reservoir interaction was also investigated. The results showed that it is very useful to establish a methodology to pre-select the more suitable polymer for fluid injection operations in oil field. Besides, for the conditions used in this study, the best polymer presents hydrolysis degree of 30%, molar mass of 5106 and intrinsic viscosity of 10 ml/g.
 Silva I., Melo M., Luvizotto J. and Lucas E.: LACPEC 2007, SPE 107 727.
 Chang H.: Fifth Symposium on IOR of the Society of Petroleum Engineers of AIME, Tulsa, Oklahoma, 1978, SPE 7043.
 Lake L.: Enhanced Oil Recovery. Prentice Hall, Englewood Cliffs, New Jersey 1989.
 Sorbie K.: Polymer-Improved Oil Recovery. CRC Press, BocaRaton, Florida 1991.
 Green D. and Willhite G.: SPE Texbook Series, 6, Richardson, Texas 1998.
 American Petroleum Institute: “Recommended Practices for Evaluation of Polymers Used in Enhanced Oil Recovery Operations”, RP 63, 1st edn., 1990.
 Melo M., Silva I. and Godoy G.: Polymer Injection Projects in Brazil: Dimensioning, Field Application and Evaluation, SPE 75 194, 04/2002.
 Chatterji J. and Borchardt J.: 55th Annual Fall Technical Conference and Exhibition of the Society of Petroleum Engineers of AIME, Dallas, Texas 1980, SPE 9288.
 Noik C.: Polymer: Solution Properties. Curso de Injeção de polímero, Rio de Janeiro, 1994.
 Halasz S.: Aspects of Saline and Hest Stable Polymers for Enhanced Oil Recovery, 1980.
 FLOPAAM™: Polymers for Enhanced Oil Recovery from design to injection. SNF-FLOERGER, Mars 2006.
 Private database: Brazilian Petroleum Company, Research Center.
 Kuliche W., Bose N. and Boudin M.: The Role of Polymers in Enhanced Oil Recovery [in:] Stahl G. and Schulz D. (eds.), Water-Soluble Polymers for Petroleum Recovery. New York 1988.
 Dawson R. and Lantz R.: Soc. Petrol. Eng. J., 1972, 448.
 Bhupendra N., Willhite G. and Green D.: 53rd Annual Fall Technical Conference and Exhibition of the Society of Petroleum Engineers of AIME, Houston, Texas 1978, SPE 7586.