Dynamic Modes of Synchronous Electric Drive with Centrifugal Hydraulic Load of Pump Station

: pp. 48 – 55
Received: January 29, 2021
Revised: February 18, 2021
Accepted: February 25, 2021
Lviv Polytechnic National University
Lviv Polytechnic National University

The contemporary state of the modelling of the pump station’s electric drive in a complex with its centrifugal hydraulic load has been analysed. It was found that most studies focus either on the modelling and development of automatic control systems for the asynchronous electric drive of pumps or on the optimization of performance indicators of the station as a whole. Besides, usually only one of the subsystems of a pumping station (or an electrically-operated pump unit) is modelled with a good degree of detail: either electromagnetic or hydraulic. This approach does not allow a concurrent research of electromagnetic and hydraulic processes in them. The paper proposes a comprehensive mathematical model of the dynamic modes of the synchronous electrically-operated centrifugal pump unit with a pipeline, in which the electromagnetic and hydraulic subsystems are presented with a balanced degree of detail. The developed model was verified and its viable applications were suggested. 

  1. Kutsyk A.S. Mathematical model of the system "frequency-controlled electric drive - pump - water supply network" / A.S. Kutsyk, A. O. Lozynskyi, O. F. Kinchur // Bulletin of the Lviv Polytechnic National University. Series of Electrical Power and Electromechanical Systems,– 2015.– No. 834.– P. 48–55. (in Ukrainian)
  2. Energy efficiency analysis of fixed-speed pump drives with various types of motors / V. Goman, S. Oshurbekov, V. Kazakbaev, V. Prakht, et al. // Applied Sciences (Switzerland). — 2019. — Vol. 24. — Iss. 9. — 5295. https://doi.org/10.3390/app9245295
  3. Yaremak I.I. Multi-purpose optimization of the established modes of operation of electric pumping stations of main oil pipelines. PhD Thesys, Ivano-Frankiv. nat. tech. University of Oil and Gas. - Ivano-Frankivsk, 2018. (in Ukrainian)
  4. Chenni, Rachid & Zarour, L & Bouzid, A. & Kerbache, Tahar. (2006). Comparative study of photovoltaic pumping systems using a permanent magnet synchronous motor (PMSM) and an asynchronous motor (ASM). Rev. Energ. Ren. 9. 17-28.
  5. H. Kim, A. Posa, J. Nerg, J. Heikkinen and J. T. Sopanen, Analysis of Electromagnetic Excitations in an Integrated Centrifugal Pump and Permanent Magnet Synchronous Motor, in IEEE Transactions on Energy Conversion, vol. 34, no. 4, pp. 1759-1768, Dec. 2019. https://doi.org/10.1109/TEC.2019.2935785
  6. Variable Speed Induction Starting Synchronous Motor Driving Centrifugal Pump / Mohamed I. Abdelwanis, Ragab A. El-Sehiemy / Proceedings of the International Conference on Electrical and Computer Engineering (ICECE 2013) Benghazi, Libya, 2013 .– https://www.researchgate.net/publication/236626332 .
  7. Bouzeria, Hamza & Fetha, C. & Bahi, Tahar & Abadlia, Issam & Zakaria, Layate & Lekhchine, Salima. (2015). Fuzzy Logic Space Vector Direct Torque Control of PMSM for Photovoltaic Water Pumping System. Energy Procedia. 74. 760-771. https://doi.org/10.1016/j.egypro.2015.07.812
  8. Ibrahim, M.N.; Rezk, H.; Al-Dhaifallah, M.; Sergeant, P. Modelling and Design Methodology of an Improved Performance Photovoltaic Pumping System Employing Ferrite Magnet Synchronous Reluctance Motors. Mathematics 20208, 1429. https://doi.org/10.3390/math8091429
  9. Modelling of steady-state modes of the electrical network from the synchronous electric drive of hydraulic loading / V. H. Lysiak, M. Yo. Oliinyk, M. B. Sabat, Y. L. Shelekh // Electrical Power and Electromechanical Systems. — Lviv : Lviv Polytechnic Publishing House, 2019. — Vol 1. — No. 1. —pp. 36–45. (in Ukrainian)
  10. Analysis of efficiency and reliability indicators of the pump set based on a systemic approach / V.S. Kostyshyn, I.I. Yaremak // Rozvidka ta rozrobka naftovykh ta hazovykh rodovyshch. - 2017. – No.1. - pp. 50-60.
  11. Mathematical Modeling and Simulation of Transients in Power Distribution Systems with Valve Devices and Dynamic Loading / P.Gogolyuk, T. Grechyn, A. Ravlyk, I. Grinberg / Proceedings of the IEEE Power Engineering Society General Meeting, Toronto, Ontario, Canada. – 2003.– pp. 1580-1585.
  12. Shelepeten T.M. Calculation of integral parameters of electromagnetic devices with the help of digital models / TM Shelepeten // Technical electrodynamics: special issue for mater. II International Scientific and Technical conf. "Mathematical modelling in electrical engineering and electrodynamics". - K., 1998. - pp. 169–172. (in Ukrainian)
  13. Pustovetov M. Computer modelling of induction motors and transformers. Examples of interaction with power electronic converters / M. Pustovetov, K. Soltus, I. Sinyavsky. - Saarbrücken (Germany): LAP LAMBERT Academic Publishing, 2013. - 199 p. - ISBN-13: 978-3-659-40776-5. - ISBN-10: 3659407763.
  14. Kostyshyn, V.S. Modelling of Centrifugal Pumps’ Operation Modes Based on Electrohydraulic Analogy : Published Summary of the Thesis for a Doctor of Sciences in Engineering : spec. 05.15.13 Oil and Gas Pipeline, Storage Depots and Plants / Ivano-Frankivsk National Technical University of Oil and Gas. – Ivano-Frankivsk, 2003. – 36 p. (in Ukrainian)
  15. Kostyshyn, Volodymyr & Yaremak, Iryna & Kurlyak, P.O.. (2020). Creation of object-oriented model of centrifugal pump on the basis of electro-hydrodynamic analogy method. Scientific Bulletin of National Mining University. 2019, No. 6. 72-79. https://doi.org/10.29202/nvngu/2019-6/11
  16. V. Lysiak, M. Oliinyk. Modelling of hydraulic load of electric drive in electrical complex of pumping station. Energy Engineering and Control Systems, 2018, Vol. 4, No. 1, pp. 31–36. https://doi.org/10.23939/jeecs2018.01.031
V. Lysiak, M. Oliinyk. Dynamic modes of synchronous electric drive with centrifugal hydraulic load of pump station. Energy Engineering and Control Systems, 2021, Vol. 7, No. 1, pp. 48 – 55. https://doi.org/10.23939/jeecs2021.01.048