orthophosphoric acid

Formulations of road over-stabilized cationic bitumen emulsions with orthophosphoric, sulfuric and hydrochloric acids and cationic emulsifiers for slowly disintegrating emulsions have been designed. The physical and mechanical properties of the manufactured over-stabilized bitumen emulsions and their breaking behavior were determined. It has been established that over-stabilised bitumen emulsions demonstrate good storage stability for 180 days.

This article presents the review of surface dressing wear courses, being the version of preservation and sealing of road structures' top layers. In the article, there is studied the adhesion of aggregates (from various granite quarries of Ukraine) with a bitumen binder, namely bitumen emulsion, for application in surface dressing for road pavements. In the article, there are used both the Ukrainian and European testing methods for the determination of adhesion in the bitumen-aggregate system.

In this article the study is done for the adhesion of aggregates coming from various granite quarries of Ukraine with bituminous binder, namely with bitumen emulsion – for application in surface dressing technology for road pavements treatment. In the article there are used the Ukrainian and European testing methods for determination of adhesion in the “bitumen – aggregate” system. According to the Ukrainian method, there was determined the adhesion of residual binder with the chips surface after boiling in the distilled water and in the solution of glycerin and distilled water.

In the present scientific work there is done the comparative analysis of two cast emulsion-mineral mixes (CEMM) – systems on orthophosphoric and hydrochloric acids. It was determined that application of orthophosphoric acid for preparation of bitumen emulsion on oxidized bitumen leads to the substantial improvement of cohesion strength build-up rate – in comparison with identical system on hydrochloric acid.