: 27-34
Received: March 02, 2022
Revised: April 05, 2022
Accepted: May 02, 2022
Lviv Polytechnic National University
Lviv Polytechnic National University, Department of Highways and Bridges
Lviv Polytechnic National University, Department of Highways and Bridges
College of National Army Academy named after, Hetman P. Sahaidachnyi
Lviv Polytechnic National University, Department of Highways and Bridges

This article presents the review of surface dressing wear courses, being the version of preservation and sealing of road structures' top layers. In the article, there is studied the adhesion of aggregates (from various granite quarries of Ukraine) with a bitumen binder, namely bitumen emulsion, for application in surface dressing for road pavements. In the article, there are used both the Ukrainian and European testing methods for the determination of adhesion in the bitumen-aggregate system. There was developed two bitumen emulsion formulations for the thin-layer motor-road pavements by the surface dressing depending on the type of acid used (either hydrochloric or orthophosphoric).

Hajj EY, Loria L, Sebaaly PE, Borroel CM, Leiva P.(2011) Optimum Time for Application of Slurry Seal to Asphalt Concrete Pavements. Transportation Research Record.;2235(1):66-81. doi:10.3141/2235-08

  Ozdemir, Ugurcan & Kutay, M. & Hibner, Derek & Lanotte, Michele & Kumbargeri, Yogesh. (2018). Quantification of Aggregate Embedment in Chip Seals Using Image Processing. Journal of Transportation Engineering Part B: Pavements. 144. 10.1061/JPEODX.0000068.

Javon Adams, Cassie Castorena, Y. Richard Kim (2019). Construction quality acceptance performance-related specifications for chip seals, Journal of Traffic and Transportation Engineering (English Edition), Volume 6, Issue 4, Pages 337-348, ISSN 2095-7564,

Bueno M, Luong J, Terán F, Viñuela U, Vázquez VF, Paje SE.(2014) Noise Reduction Properties of an Experimental Bituminous Slurry with Crumb Rubber Incorporated by the Dry Process. Coatings; 4(3):602-613.

Oikonomou, Nikolaos & Eskioglou, P. (2007). Alternative fillers for use in slurry seal. GlobalNEST International Journal. 9.

Ergun, Murat & Iyinam, Sukriye & Iyinam, A.. (2005). Prediction of Road Surface Friction Coefficient Using Only Macro and Microtexture Measurements. Journal of Transportation Engineering 2005-04-01 131(4): 311-319

Sidun, Iurii, Vollis, Oleksiy, Hidei, Volodymyr and Bidos, Volodymyr.(2021) "Quick-traffic slurry surfacing mix with orthophosphoric acid" Production Engineering Archives, 27(3), 191-195.

Sidun Iu., Solodkyy S., Vollis O., Stanchak S. and  Bidos V. (2021) Adhesion of bituminous binders with aggregates in the context of surface dressing technology for road pavements treatment/ JTBP; 3(1): 92-99.

Zhdaniuk V. K., Terletskaya V. Ya (2009) Properties of cationic bitumen emulsions modified with aqueous cationic latex “Butonal NS 198” Bulletin of the KhNADU, 40,17-20 (in Ukrainian)

Sidun, I., Solodkyy, S., & Vollis, O. (2019). Acids in bitumen emulsions. JCEEA, t. XXXV, z. 65 (3/18). 83-90. Doi:10.7862/rb.2018.45

Sidun, Iurii & Solodkyy, Serhiy & Vollis, Oleksiy & Gunka, Volodymyr & Pyryk, Roman & Shits, Ihor. (2020). Orto-phosphoric acid as an alternative to hydrochloric acid – for cationic bitumen road emulsions. Review. Theory and Building Practice. 2(1),  88-93. 10.23939/jtbp2020.01.088.  

K. Louw, D. Rossmann, D. Cupido. (2004). The vialit adhesion test: is it an appropriate test to predict low temperature binder/aggregate failure // 8th conference on asphalt pavements for southern frica (capsa’04) – Sun City, South Africa.

Howard, I.L., Jordan, W.S., Barham, J.M., Alvarado, A., Cox, B.C. (2013). Performance Oriented Guidance for Mississippi Chip Seals. Final Report No. FHWA/MS-DOT-RD-13-211-Volume I, Mississippi Department of Transportation, Jackson, MS.

Ozdemir, Ugurcan. (2016). An acceptance test for chip seal projects based on image analysis. 10.13140/RG.2.2.36658.40644.

Kandhal, P.S. and Motter, J.B. (1991) Criteria For Accepting Precoated Aggregates for Seal Coats and Surface Treatments, Transportation Research Board, 1300, 80-89, Washington D.C.

Queensland Department of Transport and Main Roads (2012). Materials Testing Manual, The State of Queensland, Department of Transport and Main Roads.

Zhou, F., Li, H., Chen, P. and Scullion T. (2014) Research Report FHWA/TX-14/0-6674-1: Laboratory Evaluation of Asphalt Binder Rutting, Fracture, and Adhesion tests, Texas Department of Transportation, Austin

Ilchenko V.V, Kryvoruchko O.M., Samondros B.G. (2011) Developing a modern method for evaluation of stability of the surface treatment of road pavement Poltava National Technical University named after Juriy Kondratyuk 2 (30), 259-265. (in Ukrainian)

Ilchenko V.V., Sharpilo A.V.(2011) Finding effective ways to restore the roughness of the road surface / / Poltava National Technical University named after Juriy Kondratyuk 2, 249-253. (in Ukrainian)

Pavlyuk D.O, Hluhoverya V.M. (2010) Research of engraftment of thin layers of wear to road coverings. Bulletin of NTU, 21(1), 69-73 (in Ukrainian)

Pavlyuk D.O., Pavlyuk V.V , Datsenko V.M., Kishchinsky S.V., Protopopova T.M., Shuryakov M.V., Shulyak I.S., Klitchenko B.V. (2013) Regarding the rationing of gravel engraftment indicators of road surface treatments  Avtoshliakhovyk Ukrayiny.  6,34-39. (in Ukrainian)

Pavlyuk D.O., Pavlyuk V.V, Lebedev O.S Hluhoverya V.M.  Patent of Ukraine 91954. Kyiv: State Patent Office of Ukraine. (in Ukrainian)

Yi, Junyan & Feng, De & Bi, Hong & Yu, Fei. (2013). Investigation on Adhesive Behavior between Binder and Aggregate by Vialit Test under Low Temperature. Advanced Materials Research. 723, 389-396.