: 92-99
Received: February 21, 2021
Revised: March 26, 2021
Accepted: May 13, 2021
Lviv Polytechnic National University
Lviv Polytechnic National University
Lviv Polytechnic National University, Department of Highways and Bridges
College of National Army Academy named after, Hetman P. Sahaidachnyi
Lviv Polytechnic National University, Department of Highways and Bridges

In this article the study is done for the adhesion of aggregates coming from various granite quarries of Ukraine with bituminous binder, namely with bitumen emulsion – for application in surface dressing technology for road pavements treatment. In the article there are used the Ukrainian and European testing methods for determination of adhesion in the “bitumen – aggregate” system. According to the Ukrainian method, there was determined the adhesion of residual binder with the chips surface after boiling in the distilled water and in the solution of glycerin and distilled water. As the European method, for the studies there was used Vialit Plate Shock Test. There were developed three bitumen emulsion formulations.

Zhdaniuk V. K., Terletskaya V. Ya (2009) Properties of cationic bitumen emulsions modified with aqueous cationic latex "Butonal NS 198" Bulletin of the KhNADU, issue 40 p. 17-20 (in Ukrainian)
Sidun, I., Solodkyy, S., & Vollis, O. (2019). Acids in bitumen emulsions. JCEEA, t. XXXV, z. 65 (3/18). 83-90. doi:10.7862/rb.2018.45
Sidun, Iurii & Solodkyy, Serhiy & Vollis, Oleksiy & Gunka, Volodymyr & Pyryk, Roman & Shits, Ihor. (2020). Orto-phosphoric acid as an alternative to hydrochloric acid - for cationic bitumen road emulsions. Review. Theory and Building Practice. Vol. 2, No. 1. p. 88-93.
Ilchenko V.V, Kryvoruchko O.M., Samondros B.G. (2011) Developing a modern method for evaluation of stability of the surface treatment of road pavement Poltava National Technical University named after Juriy Kondratyuk issue 2 (30).p. 259-265. (in Ukrainian)
Pavlyuk D.O, Hluhoverya V.M. (2010) Research of engraftment of thin layers of wear to road coverings. Bulletin of NTU, № 21(1).p. 69-73 (in Ukrainian)
Pavlyuk D.O., Pavlyuk V.V , Datsenko V.M., Kishchinsky S.V., Protopopova T.M., Shuryakov M.V., Shulyak I.S., Klitchenko B.V. (2013) Regarding the rationing of gravel engraftment indicators of road surface treatments  Avtoshliakhovyk Ukrayiny. № 6. p. 34-39. (in Ukrainian)
Pavlyuk D.O., Lebedev O.S.  and others (2005) Device for assessing gravel engraftment during surface treatment Avtoshliakhovyk Ukrayiny. № 6. p. 25-27. (in Ukrainian)
Pavlyuk D.O., Pavlyuk V.V, Lebedev O.S Hluhoverya V.M.  Patent of Ukraine 91954. Kyiv: State Patent Office of Ukraine. (in Ukrainian)
EN 12272-3:2004 - Surface dressing - Test methods - Part 3: Determination of binder aggregate adhesivity by the Vialit plate shock test method
K. Louw, D. Rossmann, D. Cupido. (2004). The vialit adhesion test: is it an appropriate test to predict low temperature binder/aggregate failure // 8th conference on asphalt pavements for southern africa (capsa'04) - Sun City, South Africa.
Yi, Junyan & Feng, De & Bi, Hong & Yu, Fei. (2013). Investigation on Adhesive Behavior between Binder and Aggregate by Vialit Test under Low Temperature. Advanced Materials Research. 723, 389-396.
Performance Oriented Guidance for Mississippi Chip Seals. Volume I / Howard Isaac L. et al. Mississippi State University. 2013, 191 р.
Ozdemir, Ugurcan. (2016). An acceptance test for chip seal projects based on image analysis. 10.13140/RG.2.2.36658.40644.
ASTM D7000 - 19a  Standard Test Method for Sweep Test of Emulsified Asphalt Surface Treatment Samples
Kandhal, P.S. and Motter, J.B. (1991) Criteria For Accepting Precoated Aggregates for Seal Coats and Surface Treatments, Transportation Research Board, No. 1300, pp. 80-89, Washington D.C.
Queensland Department of Transport and Main Roads (2012). Materials Testing Manual, The State of Queensland, Department of Transport and Main Roads.
ASTM E303 - 93. Standard Test Method for Measuring Surface Frictional Properties Using the British Pendulum Tester
EN 13036-4:2011. Road and airfield surface characteristics - Test methods - Part 4: Method for measurement of slip/skid resistance of a surface: The pendulum test
Zhou, F., Li, H., Chen, P. and Scullion T. (2014) Research Report FHWA/TX-14/0-6674-1: Laboratory Evaluation of Asphalt Binder Rutting, Fracture, and Adhesion tests, Texas Department of Transportation, Austin
Vasiliev A.P., Pierre Chambard (1999) Surface treatment with synchronous distribution of materials. Moskow. Transdornauka. (in Russian)
Rvacheva E.M., Maryshev B.S.(2004), Surface treatment of road surfaces, Road machinery. (in Russian)
Kochetkov A.V., Susliganov P.S., Arzhanukhin S.P.(2007), Modern technologies for the device of road coverings with a rough surface,  Roads and bridges. №2 p. 28 − 31. (in Russian)
Ilchenko V.V., Sharpilo A.V.(2011) Finding effective ways to restore the roughness of the road surface, Poltava National Technical University named after Juriy Kondratyuk issue 2 p. 249-253. (in Ukrainian)