реологічні властивості

Advanced Research on the Production, Transportation and Processing of High Waxy Oil. A Review

Global demand for crude oil has grown significantly over the past two decades. However, conventional light crude oil production is declining, and more and more deposits of heavy and waxy oil, including high waxy ones, are being developed, creating new technological challenges at every level of the process, from production to transportation and refining. Among the various problems, the main one is wax deposition. Since the costs of maintenance, repair, and achieving the required low-temperature properties of commercial oil products are very high, solving this problem becomes critical.

Technological Features of High-Sulfur Heavy Crude Oils Processing

Crude oils of the Yablunivsky deposit (Poltava region, Ukraine) have been studied in order to choose further ways of their processing. The fractional composition was studied by the method of simulated distillation. The structural and mechanical properties of petroleum products, the content of metals and the elemental composition were determined. Studies have shown that oils are of high-sulfur heavy grade, without light distillates; they have high density, viscosity, and large amounts of metals. A flow chart for the processing of such oils has been proposed.

The Study of Calcium Hydroxide Structure and its Physico-Chemical and Electrokinetic Properties in Sugar Production

This article discusses the influence of the methods of lime cream generation and its physico-chemical properties on raw juice purification process. It offers some measures for the raw juice clarification process failure prevention that stem from the methods of lime cream preparation. The electrokinetic potential of the lime cream is studied and the structure of calcium hydroxide micelle is proposed.

Physico-chemical properties of high-sulfuric heavy oils from yablunivske deposit

The article presents the experimental results regarding the properties of oils from Yablunivske deposit, Poltava region, Ukraine. The obtained data allows to choose further possible processing. The crude oil was fractionated through siulation distillation, the main physico-chemical characteristics, structural and mechanical properties, as well as metals content andf elemental composition were determined. The oils under study were found to be extra-heave high-sulfuric oils, without light distillates; their density, viscosity and metal contents are high.

Rheological Properties of Polymer Colloid–Cellulose Thickener Systems

An approach to water emulsions modification with structure forming additives, namely cellulose esters, is proposed in the article. Influence of the film former origin on the system rheological properties at different shear-strain rates was examined. Structural and mechanical, as well as rheological properties of the studied systems were determined. The results confirm that hydroxyethylcellulose has a greater structure forming effect in comparison with carboxymethylcellulose.