1. JEECS
  2. All Volumes and Issues
  3. Volume 10, Number 2, 2024
  4. Research of Thermal Inertia of Thermotransducers for Measuring the Temperature of Gas Flows

Research of Thermal Inertia of Thermotransducers for Measuring the Temperature of Gas Flows

JEECS.
2024;
Volume 10, Number 2
: pp. 96 – 101
https://doi.org/10.23939/jeecs2024.02.096
Received: October 15, 2024
Revised: November 07, 2024
Accepted: November 14, 2024

V. Fedynets, I. Vasylkivskyi. Research of thermal inertia of thermotransducers for measuring the temperature of gas flows. Energy Engineering and Control Systems, 2024, Vol. 10, No. 2, pp. 96 – 101. https://doi.org/10.23939/jeecs2024.02.096

Authors:
  1. Vasyl Fedynets
  2. Ihor Vasylkivskyi
1
Lviv Polytechnic National University
2
Lviv Polytechnic National University

The temperature of gas flows is an important parameter during the research of heat and mass transfer processes, in the field of gas dynamics, as well as in manufacturing. Therefore, it is necessary to ensure a high level of requirements for the accuracy and reliability of the primary means of temperature measurement. The basic requirements are the simplicity of the design of the thermotransducer, its low thermal inertia, small dimensions, and high reliability during operation in aggressive environments at high temperature and pressure conditions. When measuring the temperature of gas flows, an important requirement is to ensure low thermal inertia. The presence of thermal inertia in thermotransducers leads to the fact that during the measurement of non-stationary temperatures of gas flows in conditions of variable heat transfer, dynamic errors occur, which make it necessary to conduct additional studies to take them into account. This paper provides a study of the thermal inertia of thermotransducers for measuring the temperature of gas flows depending on the type of flow temperature change.

Thermotransducer
a methodology
gas flow
measurements
temperature
time of thermal reaction
  1. Metrology. Resistance thermoconverters made of platinum, copper and nickel. General technical requirements and test methods : DSTU GOST 6651:2014. – K.: Ministry of Economic Development of Ukraine, 2015. - 26 p. (in Ukrainian)
  2. Thermoelectric temperature transducers. Part 1. Performance specification and tolerance of the electromotive force (EMF) :  DSTU EN 60584-1:2016 (EN 60584-1:2013, Idt). – [Effective 2016–11–01]. – Kyiv: State Committee of Ukraine for Technical Regulation and Consumer Policy, 2016. – 90 p. – (National Standards of Ukraine). (in Ukrainian)
  3. IEC 60584-1:2013. Thermocouples – Part 1: EMF specifications and tolerance Maintenance Result Date.
  4. Bulyandra, O.F. (2006). Technical thermodynamics : textbook. Technika, 320 p. (in Ukrainian)
  5. Shinkaryk, M.M. and Kravets, O.I. (2024). Basics of heat engineering : teaching manual. Individual entrepreneur Palyanitsa V.A., 132 p. (in Ukrainian)
  6. Lutsyk, Ya.T., Huk, O.P., Lakh, O.I. and Stadnyk, B.I. (2006). Temperature measurement : theory and practice. Beskyd Bit Publishers, 560 p. (in Ukrainian)
  7. Fedynets, V.O., Yusyk, J.P. and Vasylkivskyi, I.S. (2019). Peculiarities of measuring the temperature of gas flows using thermocouples. Materials of the VII International scientific and technical Internet conference “Modern methods, information, software and technical support of management systems of organizational, technical and technological complexes”, Kyiv, 26 November 2020. Access mode: https://nuft.edu.ua/naukova-diyalnist/naukovi-konferencii/ (in Ukrainian)
  8. Moffat, R.J. (1962). Gas Temperature Measurement; Temperatures, Its Measurement and Control in Science and Industry / Editor-in-Chief Charles M. Herzfeld, Reinhold Publishing Corporation in NY, 3(2), p.553-571.