The work proposes a comprehensive approach to the synthesis of the coefficients of PI- and PID-controllers, as well as the coefficients of feedback based on the state variables of the system, using the feedback linearization method for the synthesis of control influences. This approach considers not only the static but also the dynamic characteristics of the system, allowing for higher control accuracy. The feedback linearization method facilitates the transformation of nonlinear systems into linear ones, simplifying their further analysis and controller design. The research shows that the new methodology for synthesizing the coefficients of controllers provides improved system stability, reduces sensitivity to external influences, and decreases the response time of the system to changes in operating conditions. A comparison of the proposed approach with the classical feedback linearization method demonstrates significant advantages in adaptability and accuracy. Specifically, the new methodology accounts for real-time changes in system parameters, which is critically important for complex automated processes. Using a two-mass system as an example, the practical application of this approach for synthesizing a control system is demonstrated, allowing for greater precision in control and reduced energy costs. The results of experimental studies confirm the effectiveness of the proposed methodology, indicating its ability to ensure stable system operation under variable loads and external influences. The analysis showed that the new approach can be utilized not only in traditional automated systems but also in a wide range of applications, such as robotics, industrial automation, and electric drive control systems. This research opens new horizons for the further development of adaptive control methods and can serve as a foundation for future studies in this field.
- Hassan K. Khalil, (2022) Nonlinear Systems. Prentice Hall, New York, 2002, 768 p.
- Isidori, A. (1995) Nonlinear control systems, Springer-Verlag, pp. 550. https://doi.org/10.1007/978-1-84628-615-5
- Ortega, R., Garcı´a-Canseco, E. (2004) Interconnection and damping assignment passivity-based control: A survey, European J. of Control, Vol. 10(5), pp. 432-450. https://doi.org/10.3166/ejc.10.432-450
- Shchur, I., Rusek, A., & Biletskyi, Y. (2014). Energy-shaping optimal load control of PMSG in a stand-alone wind turbine as a port-controlled Hamiltonian system. Przegląd Elektrotechniczny (Electrical Review), 5, pp. 50-55.
- Lozynskyy, A., & Demkiv, L. (2016). Application of dynamic systems family for synthesis of fuzzy control for electromechanical systems. Advances in Electrical and Electronic Engineering, 14(5), pp. 543-550. https://doi.org/10.15598/aeee.v14i5.1717
- Lozynskyi, O. Yu., Lozynskyi, A. O., Paranchuk, Ya. S., Marushchak, Ya. Yu., & Tsapa, V. B. (2016). Methods for synthesizing optimal linear systems. Lviv Polytechnic Publishing House, 392 p. (in Ukrainian)
- Lascu, C., Jafarzadeh, S., Fadali, M. S., & Blaabjerg, F. (2017). Direct torque control with feedback linearization for induction motor drives. IEEE Transactions on Power Electronics, 32(3), pp. 2072-2080. https://doi.org/10.1109/TPEL.2016.2564943
- Choi, Y.-S., Choi, H. H., & Jung, J.-W. (2016). Feedback linearization direct torque control with reduced torque and flux ripples for IPMSM drives. IEEE Transactions on Power Electronics, 31(5), pp. pp. 3728-3737. https://doi.org/10.1109/TPEL.2015.2460249
- Baltag, A., Livint, G., Belehuz, L., & Baciu, A. G. (2023). Application of feedback linearization method to wind turbines with PMSG for extracting maximum power from wind energy. In 2023 10th International Conference on Modern Power Systems (MPS), Cluj-Napoca, Romania, pp. 01-06. https://doi.org/10.1109/MPS58874.2023.10187595
- Lozynskyy, A., Lozynskyy, O., Marushchak, Ya., & Kasha, L. (2020). Synthesis of combine feedback control of electromechanical system by feedback linearization method. In IEEE Problems of Automated Electrodrive. Theory and Practice (PAEP) Kremenchuk, Ukraine, pp. 1-6. https://doi.org/10.1109/PAEP49887.2020.9240776
- Accetta, A., et al. (2019). Robust control for high performance induction motor drives based on partial state-feedback linearization. IEEE Transactions on Industry Applications, 55(1), pp. 490-503. https://doi.org/10.1109/TIA.2018.2869112
- Gastaldini, C. C., Vieira, R. P., Azzolin, R. Z., & Grndling, H. A. (2013). Feedback linearization control with sliding mode speed observer for three-phase induction machines. In 2013 Brazilian Power Electronics Conference, Gramado, Brazil, pp. 345-349. https://doi.org/10.1109/COBEP.2013.6785138
- Morawiec, M., Strankowski, P., Lewicki, A., Guziński, J., & Wilczyński, F. (2020). Feedback control of multiphase induction machines with backstepping technique. IEEE Transactions on Industrial Electronics, 67(6), pp. 4305-4314. https://doi.org/10.1109/TIE.2019.2931236
- Boukas, T. K., & Habetler, T. G. (2004). High-performance induction motor speed control using exact feedback linearization with state and state derivative feedback. IEEE Transactions on Power Electronics, 19(4), pp. 1022-1028. https://doi.org/10.1109/TPEL.2004.830042
- Marushchak, Y. Yu., Lozynskyi, A. O., & Kushnir, A. P. (2011). Dynamics of two-mass systems for stabilization of modes in electric arc furnaces. Lviv Polytechnic Publishing House, 224 p. (in Ukrainian)