1. UJMEMS
  2. All Volumes and Issues
  3. Vol. 11, No. 2, 2025

Vol. 11, No. 2, 2025

In this Number

(10 papers)
INFLUENCE OF AXIAL TOOL FEED ON UNDEFORMED CHIP GEOMETRIES IN POWER SKIVING GEAR CUTTING
Andrii Slipchuk, Juraj Ondruška, Roman Protasov, Maksym Novitskyi
DOI: https://doi.org/10.23939/ujmems2025.02.001
1-9
DESIGN AND KINEMATIC ANALYSIS OF A ROBOTIC MANIPULATOR FOR CONTROLLING FIRE MONITORS
Vitaliy Korendiy, Oleksandr Kachur, Mykhailo Pylyp, Roman Karpyn, Andy Augousti, Olena Lanets
DOI: https://doi.org/10.23939/ujmems2025.02.010
10-26
NUMERICAL MODELING AND DETERMINATION OF THE STRESS-STRAIN STATE OF RAILWAY WHEELS WITH THE PRESENCE OF SUBSURFACE PHYSICAL TYPE STRESS CONCENTRATORS
Zinoviy Stotsko, Oleg Kuzin, Mykola Kuzin, Andriy Havrylyak, Mikhail Slavin
DOI: https://doi.org/10.23939/ujmems2025.02.027
27-35
ANALYSIS OF PARTS MACHINING BY CUTTING USING APPROACHES OF RELIABILITY ENGINEERING
Yaroslav Kusyi, Pavlo Brukhal, Oleg Konyukh, Paola Cocca
DOI: https://doi.org/10.23939/ujmems2025.02.036
36-43
EFFECT OF PREHEATING ON CUTTING FORCE AND MACHINING PERFORMANCE OF TITANIUM ALLOY TI-6AL-4V
Serhiy Pasternak
DOI: https://doi.org/10.23939/ujmems2025.02.044
44-52
DESIGN AND RESEARCH OF STRUCTURAL ELEMENTS OF THE ELBOW ORTHOSIS PLANETARY GEARBOX
Iaroslav Lavrenko, Daniil Okladnikov
DOI: https://doi.org/10.23939/ujmems2025.02.053
53-62
ANALYSIS OF FORCES ACTING ON THE ANCHOR-VALVE OF A PNEUMATIC SOLENOID VALVE
Petro Yatsunskyi , Nazar Horbach
DOI: https://doi.org/10.23939/ujmems2025.02.063
63-69
MODELING OF VELOCITY AND STRESS ON A FLAT SURFACE SUBJECTED TO AIRFLOW IN INTERACTION WITH OSCILLATION ENERGY
Taras Dmytriv
DOI: https://doi.org/10.23939/ujmems2025.02.070
70-81
DYNAMIC BEHAVIOR AND ENERGY DISTRIBUTION IN A CRANK-EXCITED THREE-MASS VIBRATORY SEPARATOR
Vitaliy Korendiy, Oleksandr Kachur, Olena Lanets, Roman Protasov, Oleh Parashchyn, Oleksandr Yaniv
DOI: https://doi.org/10.23939/ujmems2025.02.082
82-98
THEORETICAL FOUNDATIONS OF MODELING AND RESEARCH THE PROCESS OF CUTTING INTERNAL GEAR TEETH MESHING BY THE RADIAL-CIRCULAR METHOD
Ihor Hrytsai, Bohdan Stoliar
DOI: https://doi.org/10.23939/ujmems2025.02.099
99-106