Vol. 11, No. 3, 2025 | Academic Journals and Conferences

In this Number

(9 papers)

COMPUTER SIMULATION AND EXPERIMENTAL VERIFICATION OF RECTILINEAR MOTION TRAJECTORIES OF A SINGLE-MASS OSCILLATORY SYSTEM ACTUATED BY AN INERTIAL PLANETARY-TYPE VIBRATION EXCITER

Vitaliy Korendiy, Oleh Parashchyn, Rostyslav Predko, Oleh Kotsiumbas, Roman Pelo

DOI: https://doi.org/10.23939/ujmems2025.03.001

1-10

UNMANNED GROUND-BASED ROBOTIC SYSTEMS: CLASSIFICATION AND ANALYSIS

Vitalii Pasichnyk, Maksym Doshchenko

DOI: https://doi.org/10.23939/ujmems2025.03.011

11-19

CONCEPTUAL MODEL OF A PLM SYSTEM FOR LIFECYCLE MANAGEMENT OF CUTTING TOOLS USING DIGITAL TWINS: PREDICTINGTWINS

Oleksii Morozenko

DOI: https://doi.org/10.23939/ujmems2025.03.020

20-26

PREDICTING THE MICROHARDNESS OF ALUMINA-BASED CERAMICS USING MACHINE LEARNING METHODS

Valentyna Vavrukh, Ivan Izonіn, Volodymyr Kulyk , Roman Tkachenko, Zakharii Podoliak

DOI: https://doi.org/10.23939/ujmems2025.03.027

27-37

INVESTIGATION OF THE STRESS–STRAIN STATE OF THE PLANET GEAR SHAFT AND CARRIER OF THE PLANETARY GEARBOX OF AN ELBOW ORTHOSIS

Iaroslav Lavrenko, Daniil Okladnikov

DOI: https://doi.org/10.23939/ujmems2025.03.038

38-48

STRUCTURAL OPTIMISATION OF THE DRY CLUTCH WITH CONICAL FRICTION SURFACE WITH MULTI-OBJECTIVE FUNCTIONS

Mehmet Bozca

DOI: https://doi.org/10.23939/ujmems2025.03.049

49-60

INVESTIGATION OF GEARS WITH ASYMMETRIC PROFILE USING RELIABILITY PARAMETERS

Ihor Hrytsai, Vasyl Verhun

DOI: https://doi.org/10.23939/ujmems2025.03.061

61-68

RESEARCH ON THE MAIN CHARACTERISTICS OF SPIRAL DIRECT-FLOW CYCLONES WITH A FLAT COVER

Volodymyr Maistruk, Pavlo Maistruk

DOI: https://doi.org/10.23939/ujmems2025.03.069

69-85

IMPROVING DRIVE SYSTEM EFFICIENCY FOR LARGE-SCALE ROTARY KILNS

Іhor Kuzio, Nadiia Maherus, Yurii Sholoviy

DOI: https://doi.org/10.23939/ujmems2025.03.086

86-94