To mitigate the substantial labor, time, and material costs associated with laboratory testing, this study proposes predicting the microhardness of Al2O3-based ceramics using machine learning methods. A database was compiled from a comprehensive analysis of literature to predict the properties of alumina ceramics. The input variables include chemical composition, density, sintering temperature, and dwell time for alumina ceramics doped with ZrO2, ZrO2−Y2O3, CeO2, MgO, CaO, and SrO. The microhardness of Al2O3-based ceramics was predicted using Support Vector Regression (SVR), Random Forest, Gradient Boosting, and Ridge Regression models. To determine the predictive performance of the models, the Mean Absolute Error (MAE), Root Mean Square Error (RMSE), Maximum Error (Max Error), and the coefficient of determination (R2) were calculated, quantifying the deviation of the predicted microhardness values from the actual ones. The microhardness prediction model based on Support Vector Regression (SVR) is characterized by high predictive efficiency, as evidenced by a high coefficient of determination (R2).
[1] Z. Wang, and Y. Liu, et al., “Three-dimensional-printed biomimetic structural ceramics with excellent tribological properties", Materials, vol. 18, no. 6, pp. 1376, 2025. https://doi.org/10.3390/ma18061376.
[2] L. Xuefei, and L. Hanlian, et al., “High temperature mechanical properties of Al2O3-based ceramic tool material toughened by SiC whiskers and nanoparticles”, Ceramics International, vol. 43, no. 1, pp. 1160–1165, 2017. https://doi.org/10.1016/j.ceramint.2016.10.057.
[3] A. Taniguchi, and Y. Tanaka, “An alumina ceramic total talar prosthesis for avascular necrosis of the talus”, Foot and Ankle Clinics, vol. 24, no. 1, pp. 163–171, 2019. https://doi.org/10.1016/j.fcl.2018.10.004.
[4] J. D’Antonio, and W. Capello, et al., “New experience with alumina-on-alumina ceramic bearings for total hip arthroplasty”, The Journal of Arthroplasty, vol. 17, no. 4, pp. 390–397, 2002. https://doi.org/10.1054/arth.2002.32183.
[5] H.L.C. Pulgarín, and M.P. Albano, “Sintering and microstrusture of Al2O3 and Al2O3-ZrO2 ceramics”, Procedia Materials Science, vol. 8, pp. 180–189, 2015. https://doi.org/10.1016/j.mspro.2015.04.062.
[6] H. Hasoon Al-Moameri, et al., “A review on the biomedical applications of alumina”, Journal of Engineering and Sustainable Development, vol. 24, no. 5, pp. 28–36, 2022. https://doi.org/10.31272/jeasd.24.5.5.
[7] C. Piconi, et al., “Alumina and zirconia ceramics in joint replacements”, Journal of Applied Biomaterials and Biomechanics, vol. 1, no. 1, pp. 19–32, 2003. https://doi.org/10.1177/228080000300100103.
[8] C. Piconi, and A.A. Porporati, “Bioinert ceramics: zirconia and alumina, in: Handbook of Bioceramics and Biocomposites, I.V. Antoniac, Eds., Springer International Publishing, Cham, 2015, pp. 1–25. https://doi.org/10.1007/978-3-319-09230-0_4-1.
[9] A.Z.A. Azhar, et al., “Effects of Cr2O3 addition on the mechanical properties, microstructure and wear performance of zirconia-toughened-alumina (ZTA) cutting inserts”, Journal of Alloys and Compounds, vol. 513, pp. 91–96, 2012. https://doi.org/10.1016/j.jallcom.2011.09.092.
[10] Y.T. O, et al., “Effect of grain size on transmittance and mechanical strength of sintered alumina”; Materials Science and Engineering: A, vol. 374, no. 1-2, pp. 191–195, 2004. https://doi.org/10.1016/j.msea.2004.02.015.
[11] M.W. Khalid, et al., “Microwave hybrid sintering of Al2O3 and Al2O3–ZrO2 composites, and effects of ZrO2 crystal structure on mechanical properties, thermal properties, and sintering kinetics”, Ceramics International, vol. 46, no. 7, pp. 9002–9010, 2020. https://doi.org/10.1016/j.ceramint.2019.12.147.
[12] A.Z.A. Azhar, et al., “The effects of MgO addition on microstructure, mechanical properties and wear performance of zirconia-toughened alumina cutting inserts”, Journal of Alloys and Compounds, vol. 497, no. 1-2, pp. 316–320, 2010. https://doi.org/10.1016/j.jallcom.2010.03.054.
[13] M. Madhan, and G. Prabhakaran, “Microwave versus conventional sintering: microstructure and mechanical properties of Al2O3–SiC ceramic composites”, Boletín de La Sociedad Española de Cerámica y Vidrio, vol. 58, no. 1, pp. 14–22, 2019. https://doi.org/10.1016/j.bsecv.2018.06.001.
[14] A. Arab, et al., “Effect of MgO addition on the mechanical and dynamic properties of zirconia toughened alumina (ZTA) ceramics”, Materials, vol. 12, no. 15, pp. 2440, 2019. https://doi.org/10.3390/ma12152440.
[15] A. Arab, et al., “Effects of yttria stabilized zirconia (3Y-TZP) percentages on the ZTA dynamic mechanical properties”, International Journal of Refractory Metals and Hard Materials, vol. 50, pp. 157–162, 2015. https://doi.org/10.1016/j.ijrmhm.2015.01.005.
[16] G. Maccauro, et al., “In Vivo characterization of zirconia toughened alumina material: a comparative animal study”, International Journal of Immunopathology and Pharmacology, vol. 23, no. 3, pp. 841–846, 2010. https://doi.org/10.1177/039463201002300319.
[17] Y. Yao, et al., “Mechanical behaviors of alumina ceramics doped with rare-earth oxides”, Rare Metals, vol. 29, pp. 456–459, 2010. https://doi.org/10.1007/s12598-010-0149-5.
[18] G. Zhao, et al., “A study on in situ growth of TaC whiskers in Al2O3 matrix powder for ceramic cutting tools”, Materials Research Bulletin, vol. 47, no. 8, pp. 2027–2031, 2012. https://doi.org/10.1016/j.materresbull.2012.04.001.
[19] X. Liu, et al., “Synergistically toughening effect of SiC whiskers and nanoparticles in Al2O3-based composite ceramic cutting tool material”, Chinese Journal of Mechanical Engineering, vol. 29, no. 5, pp. 977–982, 2016. https://doi.org/10.3901/CJME.2016.0411.049.
[20] G. Zhao, et al., “Preparation of in-situ growth TaC whiskers toughening Al2O3 ceramic matrix composite”, International Journal of Refractory Metals and Hard Materials, vol. 36, pp. 122–125, 2013. https://doi.org/10.1016/j.ijrmhm.2012.08.003.
[21] M.A. Gafur, et al., “Effect of 3 mol% yttria stabilized zirconia addition on structural and mechanical properties of alumina-zirconia composites”, Materials Sciences and Applications, vol. 8, no. 7, pp. 584–602, 2017. https://doi.org/10.4236/msa.2017.87041.
[22] W. Burger, and G. Kiefer, “Alumina, zirconia and their composite ceramics with properties tailored for medical applications”, Journal of Composites Science, vol. 5, no. 11, pp. 306, 2021. https://doi.org/10.3390/jcs5110306.
[23] D. Casellas, et al., “Fracture toughness of alumina and ZTA ceramics: microstructural coarsening effects”, Journal of Materials Processing Technology, vol. 143–144, pp. 148–152, 2003. https://doi.org/10.1016/S0924-0136(03)00396-0.
[24] A. Senthil Kumar, et al., “Development of yttria and ceria toughened alumina composite for cutting tool application”, International Journal of Refractory Metals and Hard Materials, vol. 25, no. 3, pp. 214–219, 2007. https://doi.org/10.1016/j.ijrmhm.2006.05.002.
[25] Alexander B. Dresch, et al., “Ballistic ceramics and analysis of their mechanical properties for armour applications: A review”, Ceramics International, vol. 47, no. 7A, pp. 8743–8761, 2021. https://doi.org/10.1016/j.ceramint.2020.12.095.
[26] R.V. Mangalaraja, et al., “Effect of ceria on the physical, mechanical and thermal properties of yttria stabilized zirconia toughened alumina”, Materials Science and Engineering: A, vol. 343, no. 1-2, pp. 71–75, 2003. https://doi.org/10.1016/S0921-5093(02)00368-4.
[27] Y. Wade-Zhu, et al., “The ballistic impact performance of nanocrystalline zirconia-toughened alumina (nZTA) and alumina ceramics”, Journal of the European Ceramic Society, vol. 41, no. 2, pp. 1427–1437, 2021. https://doi.org/10.1016/j.jeurceramsoc.2020.09.068.
[28] M. Ipek, et al., “An evaluation of Al2O3–ZrO2 composites produced by coprecipitation method”, Journal of Alloys and Compounds, vol. 509, no. 2, pp. 486–489, 2011. https://doi.org/10.1016/j.jallcom.2010.09.073.
[29] G. Liu, et al., “Fabrication and mechanical properties of homogeneous zirconia toughened alumina ceramics via cyclic solution infiltration and in situ precipitation”, Materials & Design, vol. 32, no. 6, pp. 3440–3447, 2011. https://doi.org/10.1016/j.matdes.2011.01.055.
[30] Z. Wu, et al., “Research into the mechanical properties, sintering mechanism and microstructure evolution of Al2O3-ZrO2 composites fabricated by a stereolithography-based 3D printing method”, Materials Chemistry and Physics, vol. 207, pp. 1–10, 2018. https://doi.org/10.1016/j.matchemphys.2017.12.021.
[31] X. Xu, et al., “Low-temperature preparation of Al2O3-ZrO2 nanoceramics via pressureless sintering assisted by amorphous powders”, Journal of Alloys and Compounds, vol. 783, pp. 806–812, 2019. https://doi.org/10.1016/j.jallcom.2018.12.372.
[32] A. Nevarez-Rascon, et al., “Compressive strength, hardness and fracture toughness of Al2O3 whiskers reinforced ZTA and ATZ nanocomposites: Weibull analysis”, International Journal of Refractory Metals and Hard Materials, vol. 29, no. 3, pp. 333–340, 2011. https://doi.org/10.1016/j.ijrmhm.2010.12.008.
[33] M.C.C.D.S.E.B.D. Moraes, et al., “Mechanical properties of alumina-zirconia composites for ceramic abutments”, Materials Research, vol. 7, no. 4, 643–649, 2004. https://doi.org/10.1590/S1516-14392004000400021.
[34] Z.D.I. Sktani, et al., “The influence of in-situ formation of hibonite on the properties of zirconia toughened alumina (ZTA) composites”, Ceramics International, vol. 40, no. 4, pp. 6211–6217, 2014. https://doi.org/10.1016/j.ceramint.2013.11.076.
[35] Z. Sktani, et al., “Influence of combined CaO and CaCO3 additions on the microstructure and properties of ZTA”, Journal of The Australian Ceramic Society, vol. 52, no. 1, pp. 167–176, 2016. https://www.researchgate.net/publication/290770069_Influence_of_Combined....
[36] A. Rittidech, et al., “The relationship between microstructure and mechanical properties of Al2O3–MgO ceramics”, Materials Science and Engineering: A, vol. 438–440, pp. 395–398, 2006. https://doi.org/10.1016/j.msea.2006.02.176.
[37] J. Echeberria, et al., “Sinter and hot isostatic pressing (HIP) of multi-wall carbon nanotubes (MWCNTs) reinforced ZTA nanocomposite: Microstructure and fracture toughness”, International Journal of Refractory Metals and Hard Materials, vol. 28, no. 3, pp. 399–406, 2010. https://doi.org/10.1016/j.ijrmhm.2009.12.007.
[38] T. Oungkulsolmongkol, et al., “Hardness and fracture toughness of alumina-based particulate composites with zirconia and strontia additives”, Journal of Metals, Materials and Minerals, vol. 20, no. 2, pp. 71–78, 2010.
[39] F. Sommer, et al., “Mechanical properties of zirconia toughened alumina with 10–24 vol.% 1Y-TZP reinforcement”, Journal of the European Ceramic Society, vol. 32, no. 16, pp. 4177–4184, 2012. https://doi.org/10.1016/j.jeurceramsoc.2012.06.019.
[40] K. Vishista, and F.D. Gnanam, “Effect of strontia on the densification and mechanical properties of sol–gel alumina”, Ceramics International, vol. 32, no. 8, pp. 917–922, 2006. https://doi.org/10.1016/j.ceramint.2005.06.014.
[41] B. Mondal, et al., “Development and performance of zirconia-toughened alumina ceramic tools”, Wear, vol. 156, no. 2, pp. 365–383, 1992. https://doi.org/10.1016/0043-1648(92)90229-2.
[42] Y. Singhal, et al., “Review of Bagging and Boosting classification performance on unbalanced binary classification, in: Proc. 8th International Advance Computing Conference (IACC), IEEE, Greater Noida, India, November 2018, pp. 338–343. https://doi.org/10.1109/IADCC.2018.8692138.
[43] H. Liu, et al., “Prediction of hysteresis curve intersection points in reinforced concrete columns using improved support vector regression approach”, Journal of Building Engineering, vol. 111, pp. 113550, 2025. https://doi.org/10.1016/j.jobe.2025.113550.
[44] C.I. Ekeocha, et al., “Machine learning models and computational simulation techniques for prediction of anti-corrosion properties of novel benzimidazole derivatives”, Materials Today Communications, vol. 41, pp. 110156, 2024. https://doi.org/10.1016/j.mtcomm.2024.110156.
[45] H. Park, et al., “Novel natural gradient boosting-based probabilistic prediction of physical properties for polypropylene-based composite data”, Engineering Applications of Artificial Intelligence, vol. 135, pp. 108864, 2024. https://doi.org/10.1016/j.engappai.2024.108864.
[46] C. Han, et al., “From microstructure to multivariate prediction models: Decoding the biomechanical properties of tea stems via PLSR-Ridge regression and multifactorial orthogonal design”, Industrial Crops and Products, vol. 230, no. 1-2, pp. 121143, 2025. https://doi.org/10.1016/j.indcrop.2025.121143.