Vol. 9, No. 4, 2023 | Academic Journals and Conferences

In this Number

(6 papers)

STUDY OF THE WELDABILITY OF MOLYBDENUM TUBULAR FITTINGS OF THERMAL CONVERTERS

Volodymyr Biloborodchenko, Stanislav Biloborodchenko

DOI: https://doi.org/10.23939/ujmems2023.04.001

1-11

DYNAMIC MODEL OF THE DURATION OF GASEOUS ENVIRONMENT PUMPING FROM A LIMITED VOLUME

Taras Dmytriv

DOI: https://doi.org/10.23939/ujmems2023.04.012

12-19

STUDY OF THE GEAR CUTTING PROCESS BY THE RADIAL-CIRCULAR METHOD

Ihor Hrytsai, Dmytro Herus

DOI: https://doi.org/10.23939/ujmems2023.04.020

20-26

FREQUENCY RESPONSE AND STRENGTH ANALYSIS OF THE ELBOW ORTHOSIS PLANETARY GEARBOX SHAFT USING FEA

Iaroslav Lavrenko, Maksym Sushchenko, Oleksii Ishchenko

DOI: https://doi.org/10.23939/ujmems2023.04.027

27-41

THE POSSIBILITY OF USING STRUCTURAL DAMPING IN THE DESIGN OF A PREFABRICATED TURNING CUTTER TO REDUCE THE AMPLITUDE OF SELF-OSCILLATIONS IN THE PROCESS OF METAL CUTTING

Maksym Novitskyi, Yurii Novitskyi, Andrii Slipchuk

DOI: https://doi.org/doi.org/10.23939/ujmems2023.04.042

42-48

DEFINITION OF THE GEOMETRIC PARAMETERS OF THE UNDEFORMED CHIP AT THE CUT-IN STAGE WHEN MACHINING AN EXTERNAL GEAR USING THE POWER SKIVING METHOD

Andrii Slipchuk, Maksym Novitskyi

DOI: https://doi.org/doi.org/10.23939/ujmems2023.04.049

49-56