STUDY OF THE WELDABILITY OF MOLYBDENUM TUBULAR FITTINGS OF THERMAL CONVERTERS

https://doi.org/10.23939/ujmems2023.04.001
Received: November 23, 2023
Revised: November 26, 2023
Accepted: December 04, 2023
1
Lviv Polytechnic National University
2
Lviv Polytechnic National University

The purpose of the work is to optimize the technological solution for the production of molybdenum tubular fittings of heat exchangers (TСs) that work at high temperatures and external mechanical load on calculated and practical modes of electron beam welding. The results of welding largely depend on the degree of contamination of the material, and the combined calculation of EBW parameters according to a set of existing methods does not give an unambiguous solution, but allows to outline the range of their acceptable values for further experimental clarification. The proposed methods of testing welded fittings according to mechanical parameters and resistance to crack formation with simultaneous simulated application of operating temperature load (500...12000С) initiate the detection of cracks and provide information on the actual strength and plasticity of the metal of the welding zone in real conditions of operation of the fittings.

[1] https://aqteck.com.ua/ua/news/termoelektrychni-peretvorjuvachi-owen Thermoelectric converters ARIES. May 14, 2020

[2]. Kisla G.P., Loboda P.I. Materials Science of Refractory Metals and Compounds K.: KNU Center for Educational Literature 2019, p. 320

  [3] https:/Krohne.com/ Armature of thermometers with a thermocouple.

[4] https:/www td-etalon.com/Fittings for temperature sensors

[5] https:/books google..com. ua/ Protective pipe materials (armature)

[6] Kisla Galina Pavlovna. Materials science of refractory metals and compounds: a study guide for university students/ H.P. Kisla, P.I. Loboda, V.E. Fedorchuk, M.O. Sysoev. - K.: Center of Educational Literature, 2017. - 320p

[7] Special alloys, RZM and precious metals. Study guide / Kutsova V.Z., Nosko O.A., Kovzel M.A. - Dnipropetrovsk: NMetAU, 2007. - 163 p.

[8] Vladislav Demenko MECHANICAL TESTING OF STRUCTURAL MATERIALS NATIONAL AEROSPACE UNIVERSITY “KHARKIV AVIATION INSTITUTE” Kharkiv 2012 r.51 [9] P. Field Foster THE MECHANICAL TESTING OF METALS AND ALLOYS Cousens Press, March 1. 2007. - p. 308

[10] Gurevich S.M. Reference book on welding of non-ferrous metals. K.: Science. Dumka, 2010.-512p.

[11] Weldability of molybdeum and its alloy sheet// https:/inis.iaea.org/ Sheet welding molybdenum and its alloys

[12] https:/ www.total material. com/ Welding of reactive and refractory materials

[13] https:/ebindustries.com/laser-welding molybdeum

[14] Kvasnytsky V.V. Special methods of welding. Mykolaiv, UDMTU, 2008.-437p.

[15] Lebedev B.D., Peremytko V.V. Calculation methods in fusion welding. Dneprodzerzh State Technical University, 2008.-285p.

[16] Volodarskyi E.T., Kosheva L.O. Statistical data processing: Education. manual. - K.: NAU, 2008. - 308p.