Development of the finishing and strengthening technological operations using SADT-technologies

https://doi.org/10.23939/ujmems2019.03-04.057
Надіслано: Вересень 12, 2019
Переглянуто: Листопад 30, 2019
Прийнято: Грудень 28, 2019
1
Національний університет «Львівська політехніка»
2
Karpenko Physico-Mechanical Institute of the NAS of Ukraine
3
Національний університет «Львівська політехніка»
4
Slovak University of Technology

The rational design of technological processes of parts manufacturing in single and small-scale production is inefficient without wide introduction of modern tools of part manufacturing automation with modern computer-based equipment and software. It is desirable to carry out of automated synthesis of single route technological processes with minimal influence of the operator on the technological environment. The technology of computer-aided design of technological processes is used to develop effective algorithms of functioning of adapted systems for control of technological processes and their implementation when taking into account interrelations with the technological environment. Automated development of technological environments of a given level of design concerning a dedicated technical system is possible on the basis of their rational functional models, created by means of CALS-technologies. The rational use of the SADT methodology with application of the principle of decomposition and development of the SADT-diagrams allows to solve the given technical problems. Therefore, the purpose of this paper is to develop and study the vibrational-centrifugal surface strengthening at the finishing and hardening technological operation to provide the required quality parameters and operational characteristics of the parts. The object of this research is a finishing and hardening technological operation. The subject of this research is method and parameters of vibrational-centrifugal surface strengthening to provide the required quality parameters and operational characteristics of the parts. The development of SADT diagrams allows to divide the technological process to technological operations, cutter–setting positions, technological steps, main machining steps etc. In this paper the principles of control of technological operation for vibration-centrifugal strengthening of surfaces of parts are suggested. The experimental device for machining of inner surfaces of parts is described. The initial and detailed model of the operation of the vibrational-centrifugal strengthening is offered. Statistical and structural analysis of technological process made it possible to establish the influence of the parameters of the vibrational-centrifugal strengthening on the geometric and physical-mechanical parameters of the surface quality and associated operational characteristics. Further research in that field will be related on the development of practical recommendations for using of the vibrational-centrifugal surface treatment for improving of the geometric and physical and mechanical parameters of parts surfaces.

[1] Ya. M. Kusyi, “Tekhnolohichne zabezpechennia fizyko-mekhanichnykh parametriv poverkhnevykh shariv metalevykh dovhomirnykh tsylindrychnykh detalei vibratsiino-vidtsentrovym zmitsnenniam” [“The technological providing of physical and mechanical parameters of surface layers of metal long-sized cylindrical parts by means of vibrational-centrifugal strengthening”], PhD. dissertation, Lviv Polytechnic National University, Lviv, Ukraine, 2002. [in Ukrainian].

[2] Ya. M. Kusyi, “Tekhnolohichne uspadkovuvannya vlastyvostey pry zabezpechenni parametriv yakosti vyrobu v protsesi yoho vyhotovlennya” [“Technological inheritability of properties for providing of quality parameters of part during it manufacturing”], Systemni tekhnolohiyi [System Technologies], vol. 5 (124), pp. 171–184, 2019 [in Ukrainian]. https://doi.org/10.34185/1562-9945-5-124-2019-16

[3] Ya. Kusyi, A. Kuk, and O. Kostiuk, “Use of vibration technologies for ensuring quality parameters of products surfaces”, in Materials of 19th International Conference on Thermal Science and Engineering of Serbia – SIMTERM 2019, Sokobanja, Serbia, October 22–25, 2019, p. 142.

[4] I. S. Aftanaziv, L. I. Shevchuk, O. I. Strohan, A.M. Kuk, and I. L. Samsin, “Improving reliability of drill pipe by strengthening of thread connections of its elements”. Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, vol. 4, pp. 22–29, 2019. https://doi.org/10.29202/nvngu/2019-4/8

[5] V. Blumenstein, K. Rakhimyanov, M. Heifetz, and A. Kleptzov, “Problem of technological inheritance in machine engineering”, AIP Conference Proceedings, vol. 1698 (1), pp. 2–7, 2016. https://doi.org/10.1063/1.4937831

[6] B. Denkena, et al., “Development and first Applications of Gentelligent Components over their Life-Cycle”, CIRP Journal of Manufacturing Science and Technology, vol. 7 (2), pp. 139–150, 2014. https://doi.org/10.1016/j.cirpj.2013.12.006

[7] R. H. Gubaydulina, S. V. Gruby, and G. D. Davlatov, “Analysis of the Lifecycle of Mechanical Engineering Products”, IOP Conference Series: Materials Science and Engineering, vol. 142 (1), Article number 012060, 2016. https://doi.org/10.1088/1757-899X/142/1/012060

[8] M. Winkens, M. Goerke, and P. Nyhuis, “Use of Life Cycle Data for Condition-Oriented Maintenance”, International Journal of Mechanical, Aerospace, Industrial and Mechatronics Engineering, vol. 9 (4), pp. 1178–1181, 2015.

[9] A. M. Gontarz, D. Hampl, L. Weiss, and K. Wegener, “Resource Consumption Monitoring in Manufacturing Environments”, Procedia CIRP, vol. 26 (1), pp. 264–269, 2015. https://doi.org/10.1016/j.procir.2014.07.098

[10] B. Denkena, J. Schmidt, and M. Krüger, “Data mining approach for knowledge-based process planning”, in Proceedings of the 2nd International Conference on System-Integrated Intelligence, Bremen, Germany, July 2-4, 2014, pp. 407–416.

[11] C. Bauerdick, M. Helfert, L. Petruschke, J. Sossenheimer, and E. Abele, “An Automated Procedure for Workpiece Quality Monitoring Based on Machine Drive-Based Signals in Machine Tools”, Procedia CIRP, vol. 72 (1), pp. 357–362, 2018. https://doi.org/10.1016/j.procir.2018.03.245

[12] V. A. Okulesskiy, Funktsionalnoye modelirovaniye – metodologicheskaya osnova realizatsii protsessnogo podkhoda [Functional modeling is the methodological basis for the implementation of the process approach]. Moscow, Russia: NITs CALS-tekhnologiy “Prikladnaya logistika” Publ., 2001. [in Russian].

[13] D. A. Marca, and C. L. McGovan, SADT: Structured Analysis and Design Techniques. New York, USA: McGraw-Hill Publ., 1987.

[14] D. A. Marca, “SADT/IDEF0 for Augmenting UML, Agile and Usability Engineering Methods”, in Proc. International Conf. on Software Technologies, Seville, Spain, July 18-21, 2011, pp. 38–55. https://doi.org/10.1007/978-3-642-36177-7_3

[15] E. V. Sudov, A. I. Levin, A. V. Petrov, and E. V. Chubarova, Tekhnologii integrirovannoi logisticheskoi podderzhki izdelii mashinostroeniya [Technologies of Integrated Logistic Support of Mechanical Engineering Parts]. Moscow: Informbyuro Publ., 2006. [in Russian].

[16] Mezhdunarodnaya entsiklopediya CALS. Aviatsionnokospicheskoe mashinostroenii [International Encyclopedia CALS. Aerospace Machine Engineering]. Moscow: Nauchno-issledovatel'skiy tsentr avtomatizirovannykh sistem konstruirovaniya Publ., 2015. [in Russian].

[17] O. A. Gorlenko, and V. V. Miroshnikov. Sozdaniye sistem menedzhmenta kachestva v organizatsii [Creation of the quality management systems in the organization]. Moscow, Russia: Mashinostroenie Publ., 2002. [in Russian].

[18] Ja. Kusyj, O. Kuzin, and N. Kuzin, “Analysis of technological damageability of castings manufactured in sand molds”, Technology audit and production reserves, vol. 3 (1), pp. 17–23, 2017. https://doi.org/10.15587/2312-8372.2017.104769

[19] L. G. Odintsov, Uprochneniye i otdelka detaley poverkhnostnym plasticheskim deformirovaniyem [Strengthening and finishing of parts by means of surface plastic deformation]. Moscow, Russia: Mashinostroenie Publ., 1987. [in Russian].

Ya. Kusyi, O. Lychak, V. Topilnytskyy, M. Bošanský, "Development of the finishing and strengthening technological operations using SADT-technologies", Ukrainian Journal of Mechanical Engineering and Materials Science, vol. 5, no. 3-4, pp. 57-69, 2019.