EVALUATION OF THE EFFICIENCY OF FILTRATION DRYING FOR INDUSTRIAL DRYING OF BREWER'S SPENT GRAIN

2024;
: 161-167
1
Lviv Polytechnic National University
2
Lviv Polytechnic National University
3
Lviv Polytechnic National University

The main indicators of the filtration drying process of barley brewer’s spent grains for industrial drying, as well as the parameters of the necessary drying equipment, were calculated. To compare the effectiveness of the filtration method of drying barley brewer’s spent grain, the drying was calculated for a similar technical task in a rotary dryer. It was found that filtration drying can reduce the required drying time by more than 10 times while increasing the specific energy consumption for removing 1 kg of moisture by 16.8% compared to drying in the rotary dryer.

  1. O.S. Ivashchuk, V.M. Atamanyuk, R.A. Chyzhovych, S.A. Barabach Determination of optimal parameters of filtration drying of barley beer groats. Chemistry, Technology and Application of Substances, 7(1), 183‒187. https://doi.org/10.23939/ctas2024.01.183
  2. Mujumdar, A.S. (Ed.). (2014). Handbook of Industrial Drying (4th ed.). CRC Press. https://doi.org/10.1201/b17208
  3. Thibault, J., Alvarez, P. I., Blasco, R., & Vega, R. (2010). Modeling the mean residence time in a rotary dryer for various types of solids. Drying Technology, 28(10), 1136–1141. https://doi.org/10.1080/07373937.2010.483045
  4. Ivashchuk, O., Atamanyuk, V., Chyzhovych, R., Manastyrska, V., Barabakh, S., & Hnativ, Z. (2024). Kinetic regularities of the filtration drying of barley brewer’s spent grain // Chemistry & Chemical Technology, 18(1), 66‒75.  https://doi.org/10.23939/chcht18.01.066
  5. Ivashchuk, Oleksandr S., Atamanyuk, Volodymyr M., & Chyzhovych, Roman A. Valourization of using efficiency of filtration drying for alcohol distillery stillage. Case Studies in Chemical and Environmental Engineering, 10, 100820. https://doi.org/10.1016/j.cscee.2024.100820
  6. O’Keeffe, D., Lofts, G., Nelson, P., Pentland, P., et al. (2019). Jacaranda physics 1 VCE units 1 and 2 Fourth edition learnon and print. John Wiley & Sons Australia, Ltd. ISBN 978-0-730-37315-5
  7. Van’t Land, C.M. (2012). Drying in the Process Industry. Wiley. ISBN 978-0-470-13117-6
  8. Dziubenko, V. H., Mileikovskyi, V. O., & Sachenko, I. A. (2018). Expansion of the range of wet air i-D diagram for Environmental Safe Heat Production. Environmental Safety and Natural Resources, 26(2), 15–22. https://doi.org/10.32347/2411-4049.2018.2.15-22
  9. Sviderska, O. I., & Yarovy V.L. (2004). Research of effective thermophysical characteristics of beer grist. DonDUET Bulletin, 4, 43‒48. https://dspace.nuft.edu.ua/handle/123456789/3589
  10. Rezaei, H., Lim, C. J., & Sokhansanj, S. (2022). A computational approach to determine the residence time distribution of biomass particles in rotary drum dryers. Chemical Engineering Science, 247, 116932. https://doi.org/10.1016/j.ces.2021.116932
  11. Sai, P. S. (2013). Drying of solids in a rotary dryer. Drying Technology, 31(2), 213–223. https://doi.org/10.1080/07373937.2012.711406
  12. Jewiarz, M., Wróbel, M., Mudryk, K., & Szufa, S. (2020). Impact of the drying temperature and grinding technique on biomass grindability. Energies, 13(13), 3392. https://doi.org/10.3390/en13133392