1. JCCT
  2. All Volumes and Issues
  3. Volume 11, Number 3, 2017
  4. Forming of crude oil mixtures with increased yield of target fractions

Forming of crude oil mixtures with increased yield of target fractions

JCCT.
2017;
Volume 11, Number 3
: pp. 383–386
https://doi.org/10.23939/chcht11.03.383
Authors: 

Olena Tertyshna, Vitalina Martynenko, Kostyantyn Zamikula, Petro Topilnytskyy, Yurii Holych

Olena Tertyshna - 1, Vitalina Martynenko - 1, Kostyantyn Zamikula - 1, Petro Topilnytskyy - 2, Yurii Holych - 3

  1. State Higher Educational Institution “Ukrainian State Chemical Technological University” 8, Gagarin Ave., 49605 Dnipro, Ukraine
  2. Lviv Polytechnic National University, 12, S. Bandera St., 79013 Lviv, Ukraine
  3. JSC “Ukrtatnafta”, 3 Svishtovskaya St., 39610 Kremenchuk, Poltava region, Ukraine

Researches results of 5 samples of crude oil have been analyzed and generalized. The relationship between component, structural-group composition and physico-chemical properties have been determined to classify crude oil reliably and rapidly. Compounding and sequence of crude oil mixture forming have been developed to provide the maximum yield of target fractions. These principles are based on combination of simulation method, cluster and statistic analyses. The expediency of the proposed forming method has been confirmed experimentally.

crude oil
mixture
compounding
simulation
target fraction

[1] Evdokimov I., Losev A., Fesan A.: Burenie Nefti, 2012, 1, 27.
[2] Ovcharov S., Pikalov G., Pikaloc S.: Khim. Technol. Topliv Masel, 2005, 1, 37.
[3] ASTM D 86-05 Standard test method for distillation of petroleum products at atmospheric pressure EN ISO 3405:2000 Petroleum products – Determination of distillation characteristics at atmospheric pressure (ISO 3405:2000).
[4] ASTM D 1298-99e2 Standard test method for density, relative density (specific gravity), or API gravity of crude petroleum and liquid petroleum products by hydrometer method EN ISO 3675:1998 Crude petroleum and liquid petroleum products – Laboratory determination of density – Hydrometer method (ISO 3675:1998).
[5] ASTM D 4052-09 Standard Test Method for Density, Relative Density, and API Gravity of Liquids by Digital Density Meter.
[6] ASTM D 445-04е1 Standard test method for kinematic viscosity of transparent and opaque liquids (the calculation of dynamic viscosity).
[7] ASTM D97-17 Standard Test Method for Pour Point of Petroleum Products. (ISO 3016:1994 Petroleum Products – Determination of Pour Point).
[8] Eremenko V., Pereidenko A.: Vost. Evr. Zh. Perdovykh Technol., 2010, 43, 40.
[9] Umanets T.: Zagalna Teoria Statystyky. Znannia, Kyiv 2006.
[10] Tertyshna O.: VIII Int. Conf. “Advance in Petroleum and Gas Chemistry and Petrochemistry”, Ukraine, Lviv 2016, 24.
[11] Ovcharov S., Pikalov G., Pikalov S., Ovcharova A.: Sbornik Nauchn. Trudov SevKavNIPIgaza, 2004, 41, 319.