Viscoelastic properties of amine-cured epoxytitania composites were investigated. The composites were synthesized by the sol-gel method and analysis of their physico-mechanical properties indicated that higher TiO2 content causes the decrease in glass transition temperature of the composites. Non-linear change of crosslink density with a filler content was observed.
[1] Liu B-T., Tang Sh-J., Yu Y-Y., Lin S-H.: Colloid. Surface A, 2011, 377, 138. https://doi.org/10.1016/j.colsurfa.2010.12.046
[2] Ghosh Р., Pathak A., Goyat M., Halder S.: J. Reinf. Plast. Compos., 2012, 31, 1180. https://doi.org/10.1177/0731684412455955
[3] Merad L., Benyoucef B., Abadie M., Charles J.: Exp. Techniques, 2014, 38, 59. https://doi.org/10.1111/j.1747-1567.2011.00797.x
[4] Pomogailo A.: Colloid J., 2005, 67, 658. https://doi.org/10.1007/s10595-005-0148-7
[5] Mascia L., Lavorgna M.: Nanostructured Polymer Composites by Sol-Gel Method [in:] Nicolais L, Borzacchiello A. (Eds.), Wiley Encyclopedia of Composites, 2nd edn. John Wiley & Sons, Inc., NJ 2012, 1-20. https://doi.org/10.1002/9781118097298.weoc158
[6] Chau J., Tung Ch-T., Lin Y-M., Li A-K.: Mater. Lett., 2008, 62, 3416. https://doi.org/10.1016/j.matlet.2008.02.058
[7] Bondioli F., Darecchio M., Luyt A., Messori M.: J. Appl. Polym. Sci., 2011, 122, 1792. https://doi.org/10.1002/app.34264
[8] Yu Y-Y., Rao Y-C., Chang Ch-Ch.: Thin Solid Films, 2013, 546, 236. https://doi.org/10.1016/j.tsf.2013.05.038
[9] Rajabi L., Mohammadi Z., Derakhshan A.: Iran. J. Chem. Eng., 2013, 10, 16.
[10] Nielsen L., Landel R.: Mechanical Properties of Polymers and Composites. Marcel Dekker Inc., New York 1974.
[11] Glebova I., Zhil’tsova S., Mikhal’chuk V. et al.: Nanostructured Materials – 2014: Belarus – Russia – Ukraine (NANO–2014): VI Int. Sci. Conf., Belarus, Minsk 7–10 Oct., 2014, 94.
[12] Leonova N., Mikhal’chuk V., Mamunya Ye. et al.: Polym. Sci. D., 2013, 6, 210. https://doi.org/10.1134/S1995421213030131
[13] Zhil’tsova S., Mikhal’chuk V., Lyga R., Pavlii P.: Theor. Exp. Chem., 2014, 50, 191. https://doi.org/10.1007/s11237-014-9365-7
[14] Sun Y., Zhang Zh., Wong C.:Polymer, 2005, 46, 2297. https://doi.org/10.1016/j.polymer.2005.01.041
[15] Rubab Z., Afzal A., Siddiqi H., Saeed Sh.: Sci. World J., 2014, 2014, 515739. https://doi.org/10.1155/2014/515739
[16] Dorigato A., Pegoretti A., Bondioli F., Messori M.: Compos. Interfaces, 2010, 17, 873. https://doi.org/10.1163/092764410X539253
[17] Piscitelli F., Lavorgna M., Buonocore G. et al.: Macromol. Mater. Eng., 2013, 298, 896. https://doi.org/10.1002/mame.201200222
[18] Rosso P., Ye L.: Macromol. Rapid. Commun., 2007, 28, 121. https://doi.org/10.1002/marc.200600588
[19] Xiong M., Zhou S., You B. et al.: Polym. Sci. B., 2004, 42, 3682. https://doi.org/10.1002/polb.20218