It is proposed to use plant and animal raw materials to produce corrosion inhibitors of oil refining equipment. The corrosion inhibitors based on vegetable oil and animal fat with di- and triethanolamine have been synthesized, nitrogen-containing corrosion inhibitors have been obtained, their physical and chemical parameters have been determined. By using the gravimetric method the protective effect of the received inhibitors was determined on St20 steel in a two-phase corrosive environment simulating the preliminary preparation conditions of oil at electro-salting and dehydration plants. It was shown that inhibitors on the basis of plant and animal raw materials, obtained under certain synthesis conditions, are able to protect the metal surface of oil refining equipment.
[1] Topilnytskyy P., Grynyshyn O., Machynskyy O.: Technologia Pervynnoi Pererobky Nafty i Gazu. Vyd-vo Lviv Polytechnic, Lviv 2014.
[2] Topilnytsky P.: Chem. Chem. Technol., 2007, 1, 45.
[3] Shalaby H., Ravindranath K., Tanoli N., Al-Wakaa B.: Case Stud. Eng. Failure Anal., 2017, 9(C), 1. https://doi.org/10.1016/j.csefa.2017.04.004
[4] Ormellese M.: Corrosion in Oil and Chemical Industry [in:] Wandelt K. (Ed.), Encyclopedia of Interfacial Chemistry: Surface Science and Electrochemistry, Elsevier 2018, 145-154.
[5] Gajek A., Zakroczymski T., Topilnytsky P., Romanchuk V.: Chem. Сhem. Technol., 2012, 6, 209.
[6] Romanchuk V., Topilnytsky P.: Chem. Chem. Technol., 2010, 4, 231.
[7] Goyal M., Kumar S., Bahadur I. et al.: J. Mol. Liq., 2018, 256, 565. https://doi.org/10.1016/j.molliq.2018.02.045
[8] Chygyrynets’ E., Vorobyova V.: Chem. Chem. Technol., 2014, 8, 235.
[9] Mangai A., Ravi S.: J. Chem.,2013, 2013, 4. http://dx.doi.org/10.1155/2013/527286
[10] Raghavendra N., Ishwara Bhat J.: Res. Chem. Intermed., 2016, 42, 6351. https://doi.org/10.1007/s11164-016-2467-1
[11] Adindu C. et al.: Int. Lett. Chem., Phys., Astron., 2016, 68, 24. https://doi.org/10.18052/www.scipress.com/ILCPA.68.24
[12] Njoku D., Ukaga I., Ikenna O. et al.: J. Mol. Liq., 2016, 219, 417. https://doi.org/10.1016/j.molliq.2016.03.049
[13] Okafor P., Ebenso E.: Pigm. Resin Technol., 2007, 36, 134. https://doi.org/10.1108/03699420710748992
[14] Eddy N., Ebenso E.: Pigm. Resin Technol., 2010, 39, 77. https://doi.org/10.1108/03699421011028653
[15] Patel N., Jauhari S., Mehta G.: e-J. Chem., 2009, 6, S189. https://doi.org/10.1155/2009/413421
[16] Oguzie E., Iheabunike Z., Oguzie K. et al.: J. Dispers. Sci. Technol., 2013, 34, 516. https://doi.org/10.1080/01932691.2012.682008
[17] Oguzie E., Ogukwe C., Ogbulie J. et al.: J. Mater. Sci., 2012, 47, 3592. https://doi.org/10.1007/s10853-011-6205-1
[18] Oguzie E.: Corros. Sci., 2008, 50, 2993. https://doi.org/10.1016/j.corsci.2008.08.004
[19] Oyedeji O., Adeniyi B., Ajayi O., Konig W.: Phytother. Res., 2005, 19, 362. https://doi.org/10.1002/ptr.1679
[20] Aribo S., Olusegun S., Ibhadiyi L. et al.: J. Assoc. Arab Univ. Basic Appl. Sci., 2017, 24, 34. https://doi.org/10.1016/j.jaubas.2016.08.001
[21] Pujar M., Miller A., Proroka M. et al.: J. Mater. Sci. Lett., 2000, 19, 1797. https://doi.org/10.1023/A:1006782020757
[22] Evdokimov A., Fuks I., Shabalina T., Bagdasarov L.: Smazochnye Materialy. Heft i gaz, Moskva 2000.
[23] Bregman J.: Corrosion Inhibitors. Macmillan, New York 1963.