1. ISTCMTM
  2. Всі випуски
  3. Випуск 86, номер.3, 2025
  4. THE RISKS IMPACT ANALYSIS ON THE PRODUCTION AND INSTALLATION PROCESS OF ALL-GLASS STRUCTURES

THE RISKS IMPACT ANALYSIS ON THE PRODUCTION AND INSTALLATION PROCESS OF ALL-GLASS STRUCTURES

ISTCMTM.
2025;
Випуск 86(3), Номер 3
: 64-71
https://doi.org/10.23939/istcmtm2025.03
Автори:
  1. Nazar Kurylyak
  2. Василь Яцук
1
Lviv Politechnic National University
2
Національний університет “Львівська політехніка”

The The FMEA method application to assess and reduce metrological risks during the production and installation of all-glass structures are considers in the article. A structural and functional analysis of the main stages of project implementation has been carried out: from the development of technical documentation to warranty service. For each the sub-stage process risk factors have been identified. According to the severity consequences criteria and occurrence and detection probability their quantitative assessment has been carried out also. The risk priority index (RPN) has been calculated, those allowed the critical zones ranking of the installation process. Based on the analysis results, to reduce risks and improve the quality of structures installation a set of technical and organizational measures has been developed. Based into the European standards EN 12150, EN 12600 and EN 16612A measurement control system has been proposed. The practical implementation of the proposed approaches has been tested in production conditions.

ризик
європейські стандарти
all-glass structures
quality control
technical and economic effect
  1. EN 16612:2019. Glass in building – Determination of the lateral load resistance of glass panes by calculation
  2. EN 12150-1:2015+A1:2019. Glass in building. Thermally toughened soda lime silicate safety glass – Definition and description
  3. EN 12600 Safety Glazing Testing Summary
  4. Zulqarnain, A.; Wasif, M.; Iqbal, S.A. Developing a Quality 4.0 Implementation Framework and Evaluating the Maturity Levels of Industries in Developing Countries. Sustainability 2022, 14, 11298. https://doi.org/10.3390/ su141811298 (Last accessed: 20.05.2025)
  5. Shockey S. Quality 4.0 and the Future of Quality Management.    Electronic                resource, available: https://clarkstonconsulting.com/insights/future-of-quality- management/ (Last accessed: 20.05.2025)
  6. Bassi D. Quality 4.0: Quality Management in the Digital Age.  Electronic                resource, available: https://www.linkedin.com/pulse/quality-40-management- digital-age-darshi-bassi/ (Last accessed: 20.05.2025)
  7. Respondek Z. Glass Building Elements - Technical Aspects of Safe Usage in the Structure. System Safety: Human - Technical Facility - Environment. VOLUME 1 (2019): ISSUE 1 (MARCH 2019). available: https://sciendo.com/article/10.2478/czoto-2019-0038/ (Last accessed: 20.05.2025)
  8. Silvana M, Numerical fragility assessment and structural performance analysis of glass facade systems including post-fracture residual capacity. (2023) Tesi di dottorato. Electronic resource, available: https://arts.units.it/handle/ 11368/3048138 (Last accessed: 20.05.2025)
  9. Pathirana M, Lam N., Pereira S., Lihai Z., Dong R., Gad E. Risks of failure of annealed glass panels subject to point contact actions. International Journal of Solids and Structures. Volume 129, 15 December 2017, Pages 177-194. https://www.sciencedirect.com/science/article/pii/ S0020768317304067?via%3Dihub
  10. Joint Research Centre: Institute for the Protection and Security of the Citizen, Langosch, K., Dimova, S., Pinto, A. V., Siebert, G. et al., Guidance for European structural design of glass components – Support to the implementation, harmonization and further development of the Eurocodes, Dimova, S.(editor), Pinto, A. V.(editor) and Denton, S.(editor), Publications Office, 2013, https://data.europa.eu/doi/10.2788/5523 (Last accessed: 20.05.2025)
  11. prEN 1288-1 rev - Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
  12. EN 1288-2:2000 - Glass in building - Determination of bending strength of glass - Part 2: Coaxial double ring test on flat specimens with large test surface areas
  13. EN 1288-3:2000 - Glass in building - Determination of the bending strength of glass - Part 3: Test with specimen supported at two points (four-point bending)
  14. EN 1288-4:2000 - Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
  15. EN 1288-5:2000 - Glass in building - Determination of the bending strength of glass - Part 5: Coaxial double ring test on flat specimens with small test surface areas
  16. EN 1991-1-4 Eurocode 1: Actions on structures - Part 1-4:General actions - Wind actions
  17. EN 356 Intruder Resistance: Testing and Classification of Resistance Against Manual Attack
  18. National Research Council (US) Committee on Industrial Hygiene. Occupational Health Hazards in the Glass Manufacturing Industry. National Academies Press (US); 1988. https://www.ncbi.nlm.nih.gov/books/NBK499748/
  19. Badalassi M., Biolzi L., Gianni Royer-Carfagni G., Salvatore W. Safety factors for the structural design of glass. Construction and Building Materials. Volume 55, 31 March 2014, Pages 114-127. https://doi.org/10.1016/j.conbuildmat.2014.01.005
  20. Артемук О-С., Микийчук М., Метод прогнозування метрологічних ризиків якості продукції, Measuring and computing devices in technological processes, vol. 4, pp. 179–186, 2024, https://doi.org/10.31891/2219-9365-2024-80-22