крохмаль

 The features of obtaining combined polylactide composites based on 3D printed matrices and  polyurethane binders modified with starch and epoxidized soybean oil have been established. The features of the physical and mechanical properties of combined composites have been studied by constructing load-strain curves. Factors influencing the physical and mechanical properties of the obtained composites depending on the composition of the composition and the plane of load application have been identified. 

The impact of modifiers of different origins on the biodegradability of polylactide-based materials was investigated. It was found that incorporating starch and epoxidized soybean oil into the polylactide matrix accelerates the biodegradation of the polymer composite. The effect of starch and epoxidized soybean oil on intermolecular interactions within the system was examined.

The peculiarities of the production and structure of combined composites based on polylactide 3D printed matrices and polyurethane resin were investigated. The physical and mechanical properties of the obtained composites were determined depending on the content of modifiers in the polyurethane resin. In particular, an increase in Brinell hardness and impact toughness of products based on 3D matrices filled with modified resin was revealed.

The influence of the nature of modifiers of different natures on the properties of epoxy resin is investigated. The influence of modifiers, in particular starch, epoxidized soybean oil, and polyvinyl butyral, on the physical and mechanical properties of epoxy composites is determined. The influence of the nature of the modifier on the thermophysical properties of modified epoxy resins is determined. It is found that both chemical and physical processes in the component system have a significant influence on the nature of thermomechanical dependencies.

It was studied the Processes of ensuring chemical stability (stabilization) of starch nitrate obtained by nitration of starch by two ways: nitric acid and nitric-sulfuric acid mixture. It has been confirmed that, in the first case, starch nitrate has much higher stability due to the absence of low-stable sulfuric acid esters. It is shown that to ensure it in this case, 10 minutes of washing of starch nitrate in  0,19 m3/kg of hot water (95°С) is sufficient.

Polylactide composite materials with organic filler-modifier starch, inorganic filler -calcium carbonate and plasticizer - epoxidized soybean oil for 3D printing have been developed. On the basis of the modular deformation method of calculation the elastic-plastic and deformation properties of the developed modified polylactide materials are determined. The change of modulus of deformation, modulus of elasticity, modulus of high elasticity depending on the composition of the composite is revealed.

The physicochemical regularities of interactions in the starch-glycerol-epoxidized soybean oil system under the influence of ultrasound were investigated. On the basis of rheological curves, the effect of plasticizers on the viscosity of glycerin-starch systems was revealed, depending on the shear rate, time of exposure at temperature, and the nature of starch. On the basis of IR spectroscopic studies, the existence of interactions between the components of the system was confirmed.

The physicochemical patterns of interactions in the starch-glycerol-epoxidized soybean oil system were studied. On the basis of rheological curves, the effect of plasticizers on the viscosity of glycerin-starch systems was revealed, depending on the shear rate, time of exposure at temperature, and the nature of starch. The effect of epoxidized soybean oil on the viscosity of glycerin-moist starch systems was revealed. On the basis of IR spectroscopic studies and refractive index values, the existence of interactions between the system components was confirmed.

Проведено органолептичний аналіз їстівних плівок з картопляного крохмалю, хімічно модифікованого харчового крохмалю, виготовленого з високоамілозної кукурудзи, вуглеводного полімеру із воскової кукурудзи та спеціального високотемпературного декстрину, виготовленого з тапіокового крохмалю. Встановлено, що найбільше подовження (108 %) та міцність (47,6 МПа) мають плівки на основі картопляного крохмалю. Показано, що модифіковані крохмалі, такі як декстрин та тапіоковий крохмаль, зберігають аморфну структуру плівки краще за інших.

Вивчено процесс очищення глюкоманнана гідролізом крохмалю – основного забруднювача. Встановлено, що гідролізом усувається 88,7 % крохмалю. Одержано найвищий вміст глюкоманнану 73,35 %. Проведено порівняльні дослідження ІЧ-спектрів дослідженого і комерційного глюкоманнана. За допомогою моделі Міхаеліса-Ментена описано кінетику ензиматичного гідролізу.