This paper presents the main aspects regarding the production of biodegradable microspheres, the optimization of parameters in the drug encapsulation process, the techniques available for polymeric systems sterilization and the effects of γ-irradiation on microparticles.
[1] Kolesnyk I., Konovalova V., Burban A.: Chem. Chem. Technol., 2015, 9, 485. https://doi.org/10.23939/chcht09.04.485
[2] Liu Y., Wang Y., Zhuang D. et al.: J. Colloid Interf. Sci., 2012, 377, 197. https://doi.org/10.1016/j.jcis.2012.04.004
[3] Nguyen C., Tran T., Lu X., Kasi R.: Polym. Chem., 2014, 5, 2774. https://doi.org/10.1039/C3PY01636F
[4] Jain K.: Current Status and Future Prospects of Drug Delivery Systems. [in:] Jain K. (Ed.), Drug Delivery System. Springer, New York 2014, 1-56. https://doi.org/10.1007/978-1-4939-0363-4_1
[5] Sun D., Zhuang X., Xiang X. et al.: Mol. Ther., 2010, 18, 1606. https://doi.org/10.1038/mt.2010.105
[6] Weiser J., Saltzman W.: J. Control. Release, 2014, 190, 664. https://doi.org/10.1016/j.jconrel.2014.04.048
[7] Ye F., Guo H., Zhang H., He X.: Acta Biomater., 2010, 6, 2212. https://doi.org/10.1016/j.actbio.2009.12.014
[8] Ajazuddin, Saraf S.: Fitoterapia, 2010, 81, 680. https://doi.org/10.1016/j.fitote.2010.05.001
[9] Xin H., Jiang X., Gu J. et al.: Biomaterials, 2011, 32, 4293. https://doi.org/10.1016/j.biomaterials.2011.02.044
[10] Gong J., Chen M., Zheng Y. et al.: J. Control. Release, 2012, 159, 312. https://doi.org/10.1016/j.jconrel.2011.12.012
[11] Ford Versypt A., Pack D., Braatz R.: J. Control. Release, 2013, 165, 29. https://doi.org/10.1016/j.jconrel.2012.10.015
[12] Lee J., Oh Y., Lee S., Lee K.: J. Control. Release, 2010, 146, 61. https://doi.org/10.1016/j.jconrel.2010.05.026
[13] Bohr A., Kristensen J., Stride E. et al.: Int. J. Pharm., 2011, 412, 59. https://doi.org/10.1016/j.ijpharm.2011.04.005
[14] Rodríguez Villanueva J., Bravo-Osuna I., Herrero-Vanrell R. et al.: Eur. J. Pharm. Sci., 2016, 92, 287. https://doi.org/10.1016/j.ejps.2016.03.012
[15] Yang X., Chen L., Han B. et al.: Polymer, 2010, 51, 2533. https://doi.org/10.1016/j.polymer.2010.04.032
[16] Hirota K., Hasegawa T., Nakajima T. et al.: J. Control. Release, 2010, 142, 339. https://doi.org/10.1016/j.jconrel.2009.11.020
[17] Tasker A., Hitchcock J., He L. et al.: J. Colloid Interf. Sci., 2016, 484, 10. https://doi.org/10.1016/j.jcis.2016.08.058
[18] Zelikin A., Price A., Städler B.: Small, 2010, 6, 2201. https://doi.org/10.1002/smll.201000765
[19] Wang Y., Yan Y., Cui J. et al.: Adv. Mater., 2010, 22, 4293. https://doi.org/10.1002/adma.201001497
[20] Koker S., Hoogenboom R., Geest B.: Chem. Soc. Rev., 2012, 41, 2867. https://doi.org/10.1039/c2cs15296g
[21] De Cock L., De Koker S., De Geest B., et al.: Angew. Chem. Int. Edit., 2010, 49, 6954. https://doi.org/10.1002/anie.200906266
[22] Delcea M., Möhwald H., Skirtach A.: Adv. Drug Deliv. Rev., 2011, 63, 730. https://doi.org/10.1016/j.addr.2011.03.010
[23] Shaikh J., Ankola D., Beniwal V. et al.: Eur. J. Pharm. Sci., 2009, 37, 223. https://doi.org/10.1016/j.ejps.2009.02.019
[24] Gao F., Zhang Z., Bu H. et al.: J. Control. Release, 2011, 149, 168. https://doi.org/10.1016/j.jconrel.2010.10.013
[25] Cai Z., Wang Y., Zhu L-J., Liu Z-Q.: Curr. Drug Metab., 2010, 11, 197. https://doi.org/10.2174/138920010791110836
[26] Xie X., Tao Q., Zou Y. et al.: J. Agric. Food Chem., 2011, 59, 9280. https://doi.org/10.1021/jf202135j
[27] Ensign L., Cone R., Hanes J.: Adv. Drug Deliv. Rev., 2012, 64, 557. https://doi.org/10.1016/j.addr.2011.12.009
[28] das Neves J., Nunes R., Machado A., Sarmento B.: Vaginal Drug Deliv., 2015, 92, 53. https://doi.org/10.1016/j.addr.2014.12.004
[29] Gaucher G., Satturwar P., Jones M-C. et al.: Eur. J. Pharm. Biopharm., 2010, 76, 147. https://doi.org/10.1016/j.ejpb.2010.06.007
[30] Mahajan H., Tatiya B., Nerkar P.: Powder Technol., 2012, 221, 168. https://doi.org/10.1016/j.powtec.2011.12.063
[31] Perioli L., Pagano C.: Colloid. Surface B, 2013, 102, 915. https://doi.org/10.1016/j.colsurfb.2012.10.001
[32] Mahapatro A., Singh D.: J. Nanobiotechnol., 2011, 9, 55. https://doi.org/10.1186/1477-3155-9-55
[33] Plapied L., Duhem N., des Rieux A., Préat V.: Curr. Opin. Colloid. Interf. Sci., 2011, 16, 228. https://doi.org/10.1016/j.cocis.2010.12.005
[34] Wang X-Q., Zhang Q.: Eur. J. Pharm. Biopharm., 2012, 82, 219. https://doi.org/10.1016/j.ejpb.2012.07.014
[35] Djupesland P.: Drug Deliv. Transl. Res., 2013, 3, 42. https://doi.org/10.1007/s13346-012-0108-9
[36] Singh AK., Singh A., Madhv N.: J. Drug Deliv. Ther., 2012, 2, 22. https://doi.org/10.22270/jddt.v2i3.163
[37] Gupta S., Gabrani R., Ali J., Dang S.: Recent Pat. Drug Deliv. Formul., 2011, 5, 82. https://doi.org/10.2174/187221111795471418
[38] Abruzzo A., Bigucci F., Cerchiara T. et al.: Carbohydr. Polym., 2013, 91, 651. https://doi.org/10.1016/j.carbpol.2012.08.074
[39] Pereira R., Bruschi M.: Drug Dev. Ind. Pharm., 2012, 38, 643. https://doi.org/10.3109/03639045.2011.623355
[40] Fernández-Carballido A., Puebla P., Herrero-Vanrell R., Pastoriza P.: Int. J. Pharm., 2006, 313, 129. https://doi.org/10.1016/j.ijpharm.2006.01.034
[41] The United States Pharmacopeial Convention. United Book Press, Baltimore 2013, 71-74; 1141-1145.
[42] Téllez S., Casimiro R., Vela A. et al.: Vaccine, 2006, 24, 1710. https://doi.org/10.1016/j.vaccine.2005.12.037
[43] Parveen S., Kaur S., David S. et al.: Vaccine, 2011, 29, 8012. https://doi.org/10.1016/j.vaccine.2011.08.055
[44] Tan M., Ren Y., Yan D. et al.: J. Therm. Anal. Calorim., 2011, 109, 1069. https://doi.org/10.1007/s10973-011-1804-2
[45] Hsiao C-Y., Liu S-J., Wen-Neng Ueng S., Chan E-C.: Polym. Degrad. Stab., 2012, 97, 715. https://doi.org/10.1016/j.polymdegradstab.2012.02.015
[46] Savaris M., Santos V., Brandalise R.: Mater. Sci. Eng. C, 2016, 69, 661. https://doi.org/10.1016/j.msec.2016.07.031
[47] França R., Mbeh D., Samani T. et al.: J. Biomed. Mater. Res. B, 2013, 101, 1444. https://doi.org/10.1002/jbm.b.32964
[48] Rutala W., Weber D.: Am. J. Infect. Control., 2013, 41, S2. https://doi.org/10.1016/j.ajic.2012.11.005.
[49] Asasutjarit R., Theerachayanan T., Kewsuwan P. et al.: Carbohydr. Polym., 2017, 157, 603. https://doi.org/10.1016/j.carbpol.2016.10.029
[50] Nguyen H., Morgan D., Forwood M.: Cell Tissue Bank, 2007, 8, 81. https://doi.org/10.1007/s10561-006-9019-7
[51] Zulli G., Lopes P., Velasco M. et al.: Radiat. Phys. Chem., 2010, 79, 286. https://doi.org/10.1016/j.radphyschem.2009.08.025
[52] Ilčin M., Holá O., Bakajová B., Kučerík J.: J. Radioanal. Nucl. Chem., 2010, 283, 9. https://doi.org/10.1007/s10967-009-0321-2
[53] Pokorný D., Šlouf M., Fulín P.: Acta Chir. Orthop. Traumatol. Cech., 2012, 79, 213.
[54] Zheng J., Clogston J., Patri A. et al.: J. Nanomedicine Nanotechnol., 2011, 5, 001. https://doi.org/10.4172/2157-7439.S5-001
[55] Farmacopeia Brasileira. Agência Nacional de Vigilância Sanitária. Anvisa 2010.
[56] Lambert B., Mendelson T., Craven M.: AAPS Pharm. Sci. Tech., 2011, 12, 1116. https://doi.org/10.1208/s12249-011-9644-8
[57] Silindir M., Ozer Y.: PDA J. Pharm. Sci. Technol., 2012, 66, 184. https://doi.org/10.5731/pdajpst.2012.00774
[58] Kokai L., Ghaznavi A., Marra K.: Biomaterials, 2010, 31, 2313. https://doi.org/10.1016/j.biomaterials.2009.11.075
[59] Liechty W., Kryscio D., Slaughter B., Peppas N.: Annu. Rev. Chem. Biomol. Eng., 2010, 1, 149. https://doi.org/10.1146/annurev-chembioeng-073009-100847
[60] Sun Q., Silva E., Wang A. et al.: Pharm. Res., 2010, 27, 264. https://doi.org/10.1007/s11095-009-0014-0
[61] Kumari A., Yadav SK., Yadav SC.: Colloid. Surf. B, 2010, 75, 1. https://doi.org/10.1016/j.colsurfb.2009.09.001
[62] Lee S., Hughes P., Ross A., Robinson M.: Pharm. Res., 2010, 27, 2043. https://doi.org/10.1007/s11095-010-0159-x
[63] Lyons J., Blackie P., Higginbotham C.: Int. J. Pharm., 2008, 351, 201. https://doi.org/10.1016/j.ijpharm.2007.09.041
[64] Uddin A., Bejugam N., Gayakwad S. et al.: J. Drug Target., 2009, 17, 553. https://doi.org/10.1080/10611860903067301
[65] Yoo D., Lee J-H., Shin T-H., Cheon J.: Acc. Chem. Res., 2011, 44, 863. https://doi.org/10.1021/ar200085c
[66] Behrens S.: Nanoscale, 2011, 3, 877. https://doi.org/10.1039/C0NR00634C
[67] Veiseh O., Gunn J., Zhang M.: Adv. Drug Deliv. Rev., 2010, 62, 284. https://doi.org/10.1016/j.addr.2009.11.002
[68] Doherty C., Buso D., Hill A. et al.: Acc. Chem. Res., 2014, 47, 396. https://doi.org/10.1021/ar400130a
[69] Severino P., de Oliveira G., Ferraz H. et al.: J. Pharm. Anal., 2012, 2, 188. https://doi.org/10.1016/j.jpha.2012.02.005
[70] Pastor M., Esquisabel A., Talavera A. et al.: Int. J. Pharm., 2013, 448, 247. https://doi.org/10.1016/j.ijpharm.2013.02.057
[71] Cosco D., Failla P., Costa N. et al.: Carbohydr. Polym., 2016, 152, 583. https://doi.org/10.1016/j.carbpol.2016.06.039
[72] Dreve S., Kacso I., Popa A. et al.: J. Mol. Struct., 2011, 997, 78. https://doi.org/10.1016/j.molstruc.2011.05.001
[73] Kazazi-Hyseni F., Zandstra J., Popa E. et al.: Int. J. Pharm., 2015, 482, 99. https://doi.org/10.1016/j.ijpharm.2014.12.014
[74] Rogobete A., Dragomirescu M., Bedreag O. et al.: Trends Anaesth. Crit. Care., 2016, 9, 27. https://doi.org/10.1016/j.tacc.2016.06.004
[75] Ting C-Y., Fan C-H., Liu H-L. et al: Biomaterials, 2012, 33, 704. https://doi.org/10.1016/j.biomaterials.2011.09.096
[76] Gref R., Domb A., Quellec P. et al.: Adv. Drug Deliv. Rev., 1995, 16, 215. https://doi.org/10.1016/0169-409X(95)00026-4
[77] Elsabahy M., Wooley K.: Chem. Soc. Rev., 2012, 41, 2545. https://doi.org/10.1039/c2cs15327k
[78] Mohanraj K., Sethuraman S., Krishnan U.: J. Biomed. Mater. Res. B, 2013, 101B, 840. https://doi.org/10.1002/jbm.b.32888
[79] Wang Q-S., Wang G-F., Zhou J. et al.: Int. J. Pharm., 2016, 515, 176. https://doi.org/10.1016/j.ijpharm.2016.10.002
[80] Janssen M., Timur U., Woike N. et al.: J. Control. Release, 2016, 244A, 30. https://doi.org/10.1016/j.jconrel.2016.11.003
[81] Makadia H., Siegel S.: Polymers, 2011, 3, 1377. https://doi.org/10.3390/polym3031377
[82] Miyata K., Christie R., Kataoka K.: React. Funct. Polym., 2011, 71, 227. https://doi.org/10.1016/j.reactfunctpolym.2010.10.009
[83] Deng C., Jiang Y., Cheng R. et al.: Nano Today, 2012, 7, 467. https://doi.org/10.1016/j.nantod.2012.08.005
[84] Herrero-Vanrell R., Bravo-Osuna I., Andrés-Guerrero V. et al.: Prog. Retin. Eye Res., 2014, 42, 27. https://doi.org/10.1016/j.preteyeres.2014.04.002
[85] Sharma P., Garg S.: Adv. Drug Deliv. Rev., 2010, 62, 491. https://doi.org/10.1016/j.addr.2009.11.019
[86] Cheng R., Meng F., Deng C. et al.: Biomaterials, 2013, 34, 3647. https://doi.org/10.1016/j.biomaterials.2013.01.084
[87] Xu W., Ling P., Zhang T.: J. Drug Deliv., 2013, 2013, 340315. https://doi.org/10.1155/2013/340315.
[88] Seyednejad H., Ghassemi A., van Nostrum C. et al.: J. Control. Release, 2011, 152, 68. https://doi.org/10.1016/j.jconrel.2010.12.016
[89] Cameron D., Shaver M.: Chem. Soc. Rev., 2011, 40, 1761. https://doi.org/10.1039/C0CS00091D
[90] Aliabadi H., Landry B., Mahdipoor P. et al.: Eur. J. Pharm. Biopharm., 2012, 81, 33. https://doi.org/10.1016/j.ejpb.2012.01.011
[91] Shen J., Choi S., Qu W. et al.: J. Control. Release, 2015, 218, 2. https://doi.org/10.1016/j.jconrel.2015.09.051
[92] Grumezescu V., Socol G., Grumezescu A. et al.: Appl. Surf. Sci., 2014, 302, 262. https://doi.org/10.1016/j.apsusc.2013.09.081
[93] Jain A., Kunduru K., Basu A. et al.: Adv. Drug Deliv. Rev., 2016, 107, 213. https://doi.org/10.1016/j.addr.2016.07.002
[94] Park J-H., Han C-M., Lee E-J., Kim H-W.: Mater. Lett., 2016, 181, 92. https://doi.org/10.1016/j.matlet.2016.06.020
[95] Pereira E., Cerruti R., Fernandes E. et al.: PolÃ-Meros., 2016, 26, 137. https://doi.org/10.1590/0104-1428.2323
[96] Blumenthal P., Manickam S., Espadas C., Rajadas J.: 69th American Society for Reproductive Medicine (ASRM) Annual Meeting, USA, Boston, Oct. 12-17, 2013, 316.
[97] Park K.: 30th Anniv. Spec. Issue, 2014, 190, 3. https://doi.org/10.1016/j.jconrel.2014.03.054
[98] Gigli M., Fabbri M., Lotti N. et al.: Eur. Polym. J., 2016, 75, 431. https://doi.org/10.1016/j.eurpolymj.2016.01.016
[99] Cho H., Lai T., Kwon G.: J. Control. Release, 2013, 166, 1. https://doi.org/10.1016/j.jconrel.2012.12.005
[100] Zhu Z., Xie C., Liu Q. et al.: Biomaterials, 2011, 32, 9525. https://doi.org/10.1016/j.biomaterials.2011.08.072
[101] Dash T., Konkimalla V.: J. Control. Release, 2012, 158, 15. https://doi.org/10.1016/j.jconrel.2011.09.064
[102] Grage K., Jahns A., Parlane N. et al.: Biomacromolecules, 2009, 10, 660. https://doi.org/10.1021/bm801394s
[103] Shah M., Naseer M., Choi M. et al.: Int. J. Pharm., 2010, 400, 165. https://doi.org/10.1016/j.ijpharm.2010.08.008
[104] Xiong Y-C., Yao Y-C., Zhan X-Y., Chen G-Q.: J. Biomater. Sci. Polym. Edn., 2010, 21, 127. https://doi.org/10.1163/156856209X410283
[105] Shrivastav A., Kim H-Y., Kim Y-R.: BioMed Res. Int., 2013, 2013, 581684. https://doi.org/10.1155/2013/581684.
[106] Akaraonye E., Keshavarz T., Roy I.: J. Chem. Technol. Biotechnol., 2010, 85, 732. https://doi.org/10.1002/jctb.2392
[107] Chanprateep S.: J. Biosci. Bioeng., 2010, 110, 621. https://doi.org/10.1016/j.jbiosc.2010.07.014
[108] Murase S., Aymat M., Calvet A. et. al.: Eur. Polym. J., 2015, 71, 196. https://doi.org/10.1016/j.eurpolymj.2015.07.047
[109] Nugroho P., Mitomo H., Yoshii F. et. al.: Macromol. Mater. Eng., 2001, 286, 316. https://doi.org/10.1002/1439-2054(20010501)286:5<316::AID-MAME316>3.0.CO;2-N
[110] Hwang S., Yoo E., Im S.: Polym. J., 2012, 44, 1179. https://doi.org/10.1038/pj.2012.157
[111] Zhou X-M.: Mater. Sci. Eng. C, 2012, 32, 2459. https://doi.org/10.1016/j.msec.2012.07.025
[112] Llorens E., Ibañez H., del Valle L., Puiggalí J.: Mater. Sci. Eng. C, 2015, 49, 472. https://doi.org/10.1016/j.msec.2015.01.039
[113] Zhao J., Wang X., Zeng J. et al.: J. Appl. Polym. Sci., 2005, 97, 2273. https://doi.org/10.1002/app.22009
[114] Xu J., Guo B.: Biotechnol. J., 2010, 5, 1149. https://doi.org/10.1002/biot.201000136
[115] Ferreira L., Moreira A., Pinto J., de Souza F.: Polym. Eng. Sci., 2015, 55, 1889. https://doi.org/10.1002/pen.24029
[116] Cho K., Lee J., Kwon K.: J. Appl. Polym. Sci., 2001, 79, 1025. https://doi.org/10.1002/1097-4628(20010207)79:6<1025::AID-APP50>3.0.CO;2-7
[117] Gualandi C., Soccio M., Saino E. et al.: Soft Matter., 2012, 8, 5466. https://doi.org/10.1039/c2sm25308a
[118] Wang J., Ng C., Win K. et al.: J. Microencapsul., 2003, 20, 317. https://doi.org/10.3109/02652040309178072
[119] Bahari K., Mitomo H., Enjoji T. et al.: Polym. Degrad. Stab., 1998, 62, 551. https://doi.org/10.1016/S0141-3910(98)00041-X
[120] Wu S., Zheng L., Li C. et al.: Polym. Chem., 2015, 6, 1495. https://doi.org/10.1039/C4PY01305K
[121] Deepthi S., Viha C., Thitirat C. et al.: Polymers, 2014, 6, 2974. https://doi.org/10.3390/polym6122974
[122] Costa-Pinto A., Correlo V., Sol P. et al.: J. Tissue Eng. Regen. Med., 2012, 6, 21. https://doi.org/10.1002/term.391
[123] Niu Y., Cao L., Wei J. et al.: J. Mater. Chem. B, 2014, 2, 1174. https://doi.org/10.1039/c3tb21371d
[124] Sutthiphong S., Pavasant P., Supaphol P.: Polymer, 2009, 50, 1548. https://doi.org/10.1016/j.polymer.2009.01.042
[125] Wang H., Ji J., Zhang W. et al.: Acta Biomater., 2010, 6, 154. https://doi.org/10.1016/j.actbio.2009.07.026
[126] Wang H., Wang S., Liao Z. et al.: Int. J. Pharm., 2012, 430, 342. https://doi.org/10.1016/j.ijpharm.2012.04.009
[127] Wang H., Chang X., Qiu G. et al.: Int. J. Polym. Sci., 2014, 2014, 153453. https://doi.org/10.1155/2014/153453
[128] Shishatskaya E., Goreva A., Kalacheva G., Volova T.: J. Biomater. Sci. Polym. Edn., 2011, 22, 2185. https://doi.org/10.1163/092050610X537138
[129] Mitra A., Wu Y.: Recent Pat. Drug Deliv. Formul., 2010, 4, 94. https://doi.org/10.2174/187221110791185024
[130] Kim S., Lim C-K., Na J. et al.: Chem. Commun., 2010, 46, 1617. https://doi.org/10.1039/b923309a
[131] deYoung M., MacConell L., Sarin V. et al.: Diabetes Technol. Ther., 2011, 13, 1145. https://doi.org/10.1089/dia.2011.0050
[132] Nguyen M., Lee D.: Macromol. Biosci., 2010, 10, 563. https://doi.org/10.1002/mabi.200900402
[133] Markovsky E., Baabur-Cohen H., Eldar-Boock A. et al.: J. Control. Release, 2012, 161, 446. https://doi.org/10.1016/j.jconrel.2011.12.021
[134] Sakata N., Aoki T., Yoshimatsu G. et al.: Diabetes Metab. Res. Rev., 2014, 30, 1. https://doi.org/10.1002/dmrr.2463
[135] Tian X., Wei F., Wang T. et al.: Mater. Lett., 2012, 68, 94. https://doi.org/10.1016/j.matlet.2011.10.042
[136] Zhao X., Yao Y., Tian K. et al.: Eur. J. Pharm. Biopharm., 2016, 108, 91. https://doi.org/10.1016/j.ejpb.2016.08.018
[137] Jevševar S., Kunstelj M., Porekar V.: Biotechnol. J., 2010, 5, 113. https://doi.org/10.1002/biot.200900218
[138] Gautier J., Munnier E., Paillard A. et al.: Int. J. Pharm., 2012, 423, 16. https://doi.org/10.1016/j.ijpharm.2011.06.010
[139] Pasut G., Veronese F.: J. Control. Release, 2012, 161, 461. https://doi.org/10.1016/j.jconrel.2011.10.037
[140] Milla P., Dosio F., Cattel L.: Curr. Drug Metab., 2012, 13, 105. https://doi.org/10.2174/138920012798356934
[141] Valente I., Celasco E., Marchisio D., Barresi A.: Chem. Eng. Sci., 2012, 77, 217. https://doi.org/10.1016/j.ces.2012.02.050
[142] Zhao P., Wang H., Yu M. et al.: Eur. J. Pharm. Biopharm., 2012, 81, 248. https://doi.org/10.1016/j.ejpb.2012.03.004
[143] Ogawara K., Furumoto K., Nagayama S. et al.: J. Control. Release, 2004, 100, 451. https://doi.org/10.1016/j.jconrel.2004.07.028
[144] Lu Y., Low P.: Adv. Drug Deliv. Rev., 2002, 54, 675..
[145] Kost J., Langer R.: Adv. Drug Deliv. Rev., 2012, 64, 327.
[146] Elzoghby A., Samy W., Elgindy N.: J. Control. Release, 2012, 157, 168. https://doi.org/10.1016/j.jconrel.2011.07.031
[147] Gormley A., Larson N., Sadekar S. et al.: Nano Today, 2012, 7, 158. https://doi.org/10.1016/j.nantod.2012.04.002
[148] Liu Y., Li K., Pan J. et al.: Biomaterials, 2010, 31, 330. https://doi.org/10.1016/j.biomaterials.2009.09.036
[149] Fredholm B.: Exp. Cell Res., 2010, 316, 1284. https://doi.org/10.1016/j.yexcr.2010.02.004
[150] Kataoka K., Harada A., Nagasaki Y.: Nanopart. Syst. Improv. Drug Deliv., 2001, 47, 113. https://doi.org/10.1016/S0169-409X(00)00124-1
[151] Nishiyama N., Cabral H., Kataoka K.: Micellar Structures as Drug Delivery Systems. [in:] Kratz F., Senter P., Steinhagen H. (Eds.) Drug Delivery in Oncology: From Basic Research to Cancer Therapy. Wiley-VCH Verlag GmbH & Co. KgaA, Weinheim 2011, 1051–69. https://doi.org/10.1002/9783527634057.ch32
[152] Na X-M., Gao F., Zhang L-Y. et al.: ACS Macro Lett., 2012, 1, 697. https://doi.org/10.1021/mz200222d
[153] Singh M., Hemant K., Ram M., Shivakumar H.: Res. Pharm. Sci., 2011, 5, 65.
[154] Szabó T., Molnár-Nagy L., Bognár J. et al.: Prog. Org. Coat., 2011, 72, 52. https://doi.org/10.1016/j.porgcoat.2011.03.014
[155] Nordstierna L., Abdalla A., Nordin M., Nydén M.: Prog. Org. Coat., 2010, 69, 49. https://doi.org/10.1016/j.porgcoat.2010.05.003
[156] Torchilin V.: J. Control. Release, 2001, 73, 137. https://doi.org/10.1016/S0168-3659(01)00299-1
[157] Zhang Y., Wei W., Lv P. et al.: Eur. J. Pharm. Biopharm., 2011, 77, 11. https://doi.org/10.1016/j.ejpb.2010.09.016
[158] Jyothi N., Prasanna P., Sakarkar S. et al.: J. Microencapsul., 2010, 27, 187. https://doi.org/10.3109/02652040903131301
[159] Chang M-W., Stride E., Edirisinghe M.: Langmuir, 2010, 26, 5115. https://doi.org/10.1021/la903592s
[160] Ma Y., Zhang Y., Zhao M. et al.: Chem. Commun., 2012, 48, 6217. https://doi.org/10.1039/c2cc31932b
[161] Mitragotri S., Burke P., Langer R.: Nat. Rev. Drug Discov., 2014, 13, 655. https://doi.org/10.1038/nrd4363
[162] Patel B., Gupta V., Ahsan F.: J. Control. Release, 2012, 162, 310. https://doi.org/10.1016/j.jconrel.2012.07.003
[163] Natu M., de Sousa H., Gil M.: Int. J. Pharm., 2010, 397, 50. https://doi.org/10.1016/j.ijpharm.2010.06.045
[164] Nguyen T., Ghosh C., Hwang S-G. et al.: Int. J. Pharm., 2012, 439, 296. https://doi.org/10.1016/j.ijpharm.2012.09.019
[165] Kang X., Cheng Z., Yang D. et al.: Adv. Funct. Mater., 2012, 22, 1470. https://doi.org/10.1002/adfm.201102746
[166] Berchane N., Carson K., Rice-Ficht A., Andrews M.: Int. J. Pharm., 2007, 337, 118. https://doi.org/10.1016/j.ijpharm.2006.12.037
[167] Kobiasi M., Chua B., Tonkin D. et al.: J. Biomed. Mater. Res. A, 2012, 100A, 1859. https://doi.org/10.1002/jbm.a.34153
[168] Arnida, Janát-Amsbury M., Ray A. et al.: Eur. J. Pharm. Biopharm., 2011, 77, 417. https://doi.org/10.1016/j.ejpb.2010.11.010
[169] Silva M., Winkler Hechenleitner A., de Oliveira D. et al.: Eur. J. Pharm. Sci., 2013, 49, 343. https://doi.org/10.1016/j.ejps.2013.04.006
[170] Mout R., Moyano D., Rana S., Rotello V.: Chem. Soc. Rev. 2012, 41, 2539. https://doi.org/10.1039/c2cs15294k
[171] Du J-Z., Du X-J., Mao C-Q., Wang J.: J. Am. Chem. Soc., 2011, 133, 17560. https://doi.org/10.1021/ja207150n
[172] Tabatabaei Rezaei S., Nabid M., Niknejad H., Entezami A.: Polymer, 2012, 53, 3485. https://doi.org/10.1016/j.polymer.2012.05.056
[173] Choi K., Chung H., Min K. et al.: Biomaterials, 2010, 31, 106. https://doi.org/10.1016/j.biomaterials.2009.09.030
[174] Yoo J-W., Doshi N., Mitragotri S.: Adv. Drug Deliv. Rev., 2011, 63, 1247. https://doi.org/10.1016/j.addr.2011.05.004
[175] Sharma G., Valenta D., Altman Y. et al.: J. Control. Release, 2010, 147, 408. https://doi.org/10.1016/j.jconrel.2010.07.116
[176] Venkataraman S., Hedrick J., Ong Z. et al.: Adv. Drug Deliv. Rev., 2011, 63, 1228. https://doi.org/10.1016/j.addr.2011.06.016
[177] Champion J., Katare Y., Mitragotri S.: J. Control. Release, 2007, 121, 3. https://doi.org/10.1016/j.jconrel.2007.03.022
[178] Tomic I., Vidis-Millward A., Mueller-Zsigmondy M., Cardot J-M.: Int. J. Pharm., 2016, 505, 42. https://doi.org/10.1016/j.ijpharm.2016.03.048
[179] Brunner C., Baran E., Pinho E. et al.: Colloids Surf. B, 2011, 84, 498. https://doi.org/10.1016/j.colsurfb.2011.02.005
[180] Dalmoro A., Lamberti G., Titomanlio G. et al.: AAPS Pharm. Sci. Tech., 2010, 11, 1500. https://doi.org/10.1208/s12249-010-9528-3
[181] Ma G.: J. Control. Release, 2014, 193, 324. https://doi.org/10.1016/j.jconrel.2014.09.003
[182] Tonon R., Grosso C., Hubinger M.: Food Res. Int., 2011, 44, 282. https://doi.org/10.1016/j.foodres.2010.10.018
[183] Rokka S., Rantamäki P.: Eur. Food Res. Technol., 2010, 231, 1. https://doi.org/10.1007/s00217-010-1246-2
[184] Bosnea L., Moschakis T., Biliaderis C.: Food Bioprocess. Technol., 2014, 7, 2767. https://doi.org/10.1007/s11947-014-1317-7
[185] Li M., Rouaud O., Poncelet D.: Int. J. Pharm., 2008, 363, 26. https://doi.org/10.1016/j.ijpharm.2008.07.018
[186] Delgado M., Lázaro A., Mazo J., Zalba B.: Renew Sustain Energy Rev., 2012, 16, 253. https://doi.org/10.1016/j.rser.2011.07.152
[187] Zhu M., Shi J., He Q. et al.: J. Mater. Sci., 2012, 47, 2256. https://doi.org/10.1007/s10853-011-6037-z
[188] Lee S., McClements D.: Food Hydrocoll., 2010, 24, 560. https://doi.org/10.1016/j.foodhyd.2010.02.002
[189] Hung L-H., Teh S-Y., Jester J., Lee A.: Lab. Chip., 2010, 10, 1820. https://doi.org/10.1039/c002866e
[190] Staff R., Schaeffel D., Turshatov A. et al.: Small, 2013, 9, 3514. https://doi.org/10.1002/smll.201300372
[191] Webster D., Sundaram P., Byrne M.: Eur. J. Pharm. Biopharm., 2013, 84, 1. https://doi.org/10.1016/j.ejpb.2012.12.009
[192] Nath S., Son S., Sadiasa A. et al.: Int. J. Pharm., 2013, 443, 87. https://doi.org/10.1016/j.ijpharm.2012.12.037
[193] Hao S., Wang Y., Wang B. et al.: Mater. Sci. Eng. C, 2013, 33, 4562. https://doi.org/10.1016/j.msec.2013.07.009
[194] Lee Y-H., Mei F., Bai M-Y. et al.: J. Control. Release, 2010, 145, 58. https://doi.org/10.1016/j.jconrel.2010.03.014
[195] Patil Y., Swaminathan S., Sadhukha T. et al.: Biomaterials, 2010, 31, 358. https://doi.org/10.1016/j.biomaterials.2009.09.048
[196] Sridhar R., Ramakrishna S.: Biomatter., 2013, 3, e24281. https://doi.org/10.4161/biom.24281.
[197] Almería B., Fahmy T., Gomez A.: J. Control. Release, 2011, 154, 203. https://doi.org/10.1016/j.jconrel.2011.05.018
[198] Almería B., Deng W., Fahmy T., Gomez A.: J. Colloid Interf. Sci., 2010, 343, 125. https://doi.org/10.1016/j.jcis.2009.10.002
[199] Almería B., Gomez A.: J. Colloid Interf. Sci., 2014, 417, 121. https://doi.org/10.1016/j.jcis.2013.11.037
[200] Bock N., Woodruff M., Hutmacher D., Dargaville T.: Polymers, 2011, 3, 131. https://doi.org/10.3390/polym3010131
[201] Malik S., Ng W., Bowen J. et al.: J. Colloid Interf. Sci., 2016, 467, 220. https://doi.org/10.1016/j.jcis.2016.01.021
[202] Gert N., Fabian S., Twan K. ET AL.: Int. J. Pharm., 2016, 499, 358. https://doi.org/10.1016/j.ijpharm.2016.01.020
[203] Zhang K., Wu W., Guo K. et al.: Colloid. Surface Physicochem. Eng. Asp., 2009 349, 110. https://doi.org/10.1016/j.colsurfa.2009.08.005
[204] Javadzadeh Y., Ahadi F., Davaran S. et al.: Colloid. Surface B, 2010, 81, 498. https://doi.org/10.1016/j.colsurfb.2010.07.047
[205] Paillard-Giteau A., Tran V., Thomas O. et al.: Eur. J. Pharm. Biopharm., 2010, 75, 128. https://doi.org/10.1016/j.ejpb.2010.03.005
[206] Luciani A., Coccoli V., Orsi S. et al.: Biomaterials, 2008, 29, 4800. https://doi.org/10.1016/j.biomaterials.2008.09.007
[207] Liu X., Kaminski M., Riffle J. et al.: J. Magn. Magn. Mater., 2007, 311, 84. https://doi.org/10.1016/j.jmmm.2006.10.1170
[208] Rosca I., Watari F., Uo M.: J. Control. Release, 2004, 99, 271. https://doi.org/10.1016/j.jconrel.2004.07.007
[209] Barichello J., Morishita M., Takayama K., Nagai T.: Drug Dev. Ind. Pharm., 1999, 25, 471. https://doi.org/10.1081/DDC-100102197
[210] Giunchedi P., Conte U., Alpar H.: J. Microencapsul., 1998, 15, 185. https://doi.org/10.3109/02652049809006848
[211] Kim C., Ghosh P., Pagliuca C. et al.: J. Am. Chem. Soc., 2009, 131, 1360. https://doi.org/10.1021/ja808137c
[212] Wischke C., Schwendeman S.: Int. J. Pharm., 2008, 364, 298. https://doi.org/10.1016/j.ijpharm.2008.04.042
[213] Lee T., Wang J., Wang C.: J. Control. Release, 2002, 83, 437. https://doi.org/10.1016/S0168-3659(02)00235-3
[214] Pinon-Segundo E., Nava-Arzaluz M., Lechuga-Ballesteros D.: Recent Pat. Drug Deliv. Formul., 2012 6, 224. https://doi.org/10.2174/187221112802652606
[215] Lee S., McClements D.: Food Hydrocoll., 2010, 24, 560. https://doi.org/10.1016/j.foodhyd.2010.02.002
[216] Ayoub M., Ahmed N., Kalaji N. et al.: J. Biomed. Nanotechnol., 2011, 7, 255. https://doi.org/10.1166/jbn.2011.1279
[217] Medeiros A., Machado F., Rubim J., McKenna T.: J. Polym. Sci. A, 2017, 55, 1422. https://doi.org/10.1002/pola.28511
[218] Machado F., Lima E., Pinto J.: Polym. Eng. Sci., 2010, 50, 697. https://doi.org/10.1002/pen.21572
[219] Araujo R., Ferreira G., Segura T. et al.: Eur. Polym. J., 2015, 68, 441. https://doi.org/10.1016/j.eurpolymj.2015.05.015
[220] Jensen A., Sayer C., Araújo P., Machado F.: Eur. J. Lipid Sci. Technol., 2014, 116, 37. https://doi.org/10.1002/ejlt.201300212
[221] Jensen A., de Oliveira A., Gonçalves S. et al.: J Appl Polym Sci. 2016, 133. https://doi.org/10.1002/app.44129
[222] Neves J., Valadares L., Machado F.: Curr. Appl. Polym. Sci., 2017, 1, 79. https://doi.org/10.2174/2452271601666170221124329
[223] Soares M., Machado F., Guimarães A. et al.: Polym. Eng. Sci., 2011, 51, 1919. https://doi.org/10.1002/pen.22002
[224] Freitas S., Merkle H., Gander B.: J. Control. Release, 2005, 102, 313. https://doi.org/10.1016/j.jconrel.2004.10.015
[225] Machado F., Lima E., Pinto J.: Polímeros, 2007, 17, 166. https://doi.org/10.1590/S0104-14282007000200016
[226] Peng Z., Li S., Han X. et al.: Anal. Chim. Acta, 2016, 937, 113. https://doi.org/10.1016/j.aca.2016.08.014
[227] Ramazani F., Chen W., van Nostrum C. et al.: Int. J. Pharm., 2016, 499, 358. https://doi.org/10.1016/j.ijpharm.2016.01.020
[228] Katou H., Wandrey A., Gander B.: Int. J. Pharm., 2008, 364, 45. https://doi.org/10.1016/j.ijpharm.2008.08.015
[229] Qi F., Wu J., Fan Q. et al.: Colloid. Surface B, 2013, 112, 492. https://doi.org/10.1016/j.colsurfb.2013.08.048
[230] Yunoki A., Tsuchiya E., Fukui Y. et al.: ACS Appl. Mater. Interfaces, 2014, 6, 11973. https://doi.org/10.1021/am503030c
[231] Park S., Lee Y., Hong S.: Colloid. Surface B, 2006, 47, 211. https://doi.org/10.1016/j.colsurfb.2005.12.001
[232] Crucho C., Barros M.: Polymer, 2015, 68, 41. https://doi.org/10.1016/j.polymer.2015.04.083
[233] Ruger M., Hohmann S., Sommerfeld M., Kohnen G.: At. Sprays, 2000, 10, 30. https://doi.org/10.1615/AtomizSpr.v10.i1.30
[234] Faure A., York P., Rowe R.: Eur. J. Pharm. Biopharm., 2001, 52, 269. https://doi.org/10.1016/S0939-6411(01)00184-9
[235] Zastre J., Jackson J., Burt H.: Pharm. Res., 2004, 21, 1489. https://doi.org/10.1023/B:PHAM.0000036925.45002.a2
[236] Huang P., Wang D., Su Y. et al.: J. Am. Chem. Soc., 2014, 136, 11748. https://doi.org/10.1021/ja505212y
[237] Djordjevic L., Primorac M., Stupar M., Krajisnik D.: Int. J. Pharm., 2004, 271, 11. https://doi.org/10.1016/j.ijpharm.2003.10.037
[238] Mayya K., Bhattacharyya A., Argillier J-F.: Polym. Int., 2003, 52, 644. https://doi.org/10.1002/pi.1125
[239] Wang X., Danoff E., Sinkov N. et al.: Langmuir, 2006, 22, 6461. https://doi.org/10.1021/la0605135
[240] Uchegbu I., Vyas S.: Int. J. Pharm., 1998, 172, 33. https://doi.org/10.1016/S0378-5173(98)00169-0
[241] Rosa G., Iommelli R., La Rotonda M. et al.: J. Control. Release, 2000, 69, 283. https://doi.org/10.1016/S0168-3659(00)00315-1
[242] Yeo Y., Park K.: Arch. Pharm. Res., 2004, 27, 1. https://doi.org/10.1007/BF02980037
[243] Zhang Y., Wischke C., Mittal S. et al.: Mol. Pharm., 2016, 13, 2622. https://doi.org/10.1021/acs.molpharmaceut.5b00961
[244] Jagdale S., Pawar S.: Adv. Pharm. Bull., 2017, 7, 229. https://doi.org/10.15171/apb.2017.028
[245] Haider M., Ranjha N., Bakht M. et al.: Lat. Am. J. Pharm., 2017, 36, 281.
[246] Calderó G., Montes R., Llinàs M. et al.: Colloid. Surface B, 2016, 145, 922. https://doi.org/10.1016/j.colsurfb.2016.06.013
[247] Marto J., Gouveia L., Jorge I. et al.: Colloid Surface B, 2015, 135, 183. https://doi.org/10.1016/j.colsurfb.2015.07.024
[248] Bulut E.: Artif. Cells Nanomed. Biotechnol., 2016, 44, 1482. https://doi.org/10.3109/21691401.2015.1042109
[249] Yi T., Liu C., Zhang J. et al.: Eur. J. Pharm. Sci., 2017, 96, 420. https://doi.org/10.1016/j.ejps.2016.08.047
[250] Monaco G., Cholas R., Salvatore L. et al.: Mater. Sci. Eng. C., 2017, 71, 335. https://doi.org/10.1016/j.msec.2016.10.030
[251] Lyons D., Mendenhall S., Neumeister M. et al.: Plast. Reconstr. Surg. Glob. Open, 2016, 4, e823. https://doi.org/10.1097/GOX.0000000000000819
[252] Sakar F., Özer A., Erdogan S. et al.: Pharm. Dev. Technol., 2017, 22, 775. https://doi.org/10.3109/10837450.2016.1163393
[253] Yaman A.: Curr. Opin. Drug Discov. Devel., 2001, 4, 760.
[254] Sommerfeld P., Schroeder U., Sabel B.: Int. J. Pharm., 1998, 164, 113. https://doi.org/10.1016/S0378-5173(97)00394-3
[255] Kroeze R., Helder M., Roos W. et al.: Acta Biomater., 2010, 6, 2060. https://doi.org/10.1016/j.actbio.2009.11.022
[256] Mendes G., Brandão T., Silva C.: Am. J. Infect. Control., 2007, 35, 574. https://doi.org/10.1016/j.ajic.2006.10.014
[257] Zajko Š., Klimant I.: Sensor. Actuat. B-Chem., 2013, 177, 86. https://doi.org/10.1016/j.snb.2012.10.040
[258] Savaris M., Carvalho G., Falavigna A. et al.: Mater. Res., 2016, 19, 807. https://doi.org/10.1590/1980-5373-MR-2015-0200
[259] Wilson A., Nayak S.: Anesth. Intense. Care Medicine, 2016, 17, 475. http://dx.doi.org/10.1016/j.mpaic.2016.07.002
[260] Rediguieri C., Sassonia R., Dua K. et al.: Eur. Polym. J., 2016, 82, 181. https://doi.org/10.1016/j.eurpolymj.2016.07.016
[261] Uguz I., Ganji M., Hama A. et al.: Adv. Healthc. Mater., 2016, 5, 3094. https://doi.org/10.1002/adhm.201600870
[262] Yilmaz B., L’Homme-Langlois E., Beck F.M, McGlumphy E.: J. Prosthet. Dent., 2016, 115, 718. https://doi.org/10.1016/j.prosdent.2015.11.001
[263] Rogers W.: Steam and Dry Heat Sterilization of Biomaterials and Medical Devices. [in:] Lerouge S., Simmons A. (Eds.), Sterilisation of Biomaterials and Medical Devices. Woodhead Publishing, Cambridge 2012, 20-55.
[264] Rogers W.: Sterilisation Techniques for Polymers. [in:] Lerouge S., Simmons A. (Eds.), Sterilisation of Biomaterials and Medical Devices. Woodhead Publishing, Cambridge 2012, 151-211.
[265] Sandle T.: Sterility, Sterilisation and Sterility Assurance for Pharmaceuticals. Woodhead Publishing, Cambridge 2013, ch. 7, 93-99.
[266] Bilensoy E., Hincal A.: Cyclodextrin-Based Nanomaterials in Pharmaceutical Field. [in:] Gad S. (Ed.), Pharmaceutical Sciences Encyclopedia. John Wiley & Sons Inc., Hoboken 2010, 1-23. https://doi.org/10.1002/9780470571224.pse370
[267] Kotha S., Ramakrishnaiah R., Devang Divakar D. et al. J. Investig. Clin. Dent., 2016. https://doi.oeg/10.1111/jicd.12244.
[268] Godefroid S., Vyver A., Stoffelen P., Vanderborght T.: Plant Biosystems, 2017, 151, 1054. https://doi.org/10.1080/11263504.2016.1231140
[269] Sandle T.: Sterility, Sterilisation and Sterility Assurance for Pharmaceuticals. Woodhead Publishing, Cambridge 2013, ch.10, 143-55.
[270] Konan Y., Gurny R., Allémann E.: Int. J. Pharm., 2002, 233, 239. https://doi.org/10.1016/S0378-5173(01)00944-9
[271] Li L., Mak K., Shi J. et al.: Microelectron. Eng., 2013, 111, 310. https://doi.org/10.1016/j.mee.2013.02.021
[272] Dobrovolskaia M., McNeil S. (Eds.): Handbook of Immunological Properties of Engineered Nanomaterials World Scientific Publishing Co, New Jersey 2016.
[273] Rai R., Tallawi M., Roether J. et al.: Mater. Lett., 2013, 105, 32. https://doi.org/10.1016/j.matlet.2013.04.024
[274] Dearth C., Keane T., Carruthers C. et al.: Acta Biomater., 2016, 33, 78. https://doi.org/10.1016/j.actbio.2016.01.038
[275] Fan X., Sokorai K., Weidauer A. et al.: Radiat. Phys. Chem., 2017, 130, 306. https://doi.org/10.1016/j.radphyschem.2016.09.015
[276] Mrázová H., Koller J., Kubišová K. et al.: Cell Tissue Bank., 2016, 17, 255. https://doi.org/10.1007/s10561-015-9536-3
[277] Bhatnagar D., Dube K., Damodaran V. et al.: Macromol. Mater. Eng., 2016, 301, 1211. https://doi.org/10.1002/mame.201600133
[278] Sefat F., McKean R., Deshpande P. et al.: Procedia Eng., 2013, 59, 101. https://doi.org/10.1016/j.proeng.2013.05.099
[279] Wang J., Chu L.: Radiat. Phys. Chem., 2016, 125, 56. https://doi.org/10.1016/j.radphyschem.2016.03.012
[280] Zembouai I., Kaci M., Bruzaud S. et al.: Polym. Degrad. Stab., 2016, 132, 117. https://doi.org/10.1016/j.polymdegradstab.2016.03.019
[281] Suhartini M., Mitomo H., Nagasawa N. et al.: J. Appl. Polym. Sci., 2003, 88, 2238. https://doi.org/10.1002/app.11944
[282] Croonenborghs B., Smith M., Strain P.: Radiat. Phys. Chem., 2007, 76, 1676. https://doi.org/10.1016/j.radphyschem.2007.01.014
[283] Memisoglu-Bilensoy E., Hincal A.: Int. J. Pharm., 2006, 311, 203. https://doi.org/10.1016/j.ijpharm.2005.12.013
[284] Valente T., Silva D., Gomes P. et al.: ACS Appl. Mater. Interfaces, 2016, 8, 3241. https://doi.org/10.1021/acsami.5b10869
[285] Chmielewski A., Haji-Saeid M., Ahmed S.: Nucl. Instrum. Meth B, 2005, 236, 44. https://doi.org/10.1016/j.nimb.2005.03.247
[286] Ražem D., Katušin-Ražem B.: Radiat. Phys. Chem., 2008, 77, 288. https://doi.org/10.1016/j.radphyschem.2007.06.006
[287] Ito H., Islam M.: Radiat. Phys. Chem., 1994, 43, 545. https://doi.org/10.1016/0969-806X(94)90165-1
[288] Loo SCJ, Tan HT, Ooi CP, Boey YCF. Hydrolytic degradation of electron beam irradiated high molecular weight and non-irradiated moderate molecular weight PLLA. Acta Biomater. 2006;2:287–96. https://doi.org/10.1016/j.actbio.2005.10.003
[289] Cairns M-L., Dickson G., Orr J. et al.: Polym. Degrad. Stab., 2011, 96, 76. https://doi.org/10.1016/j.polymdegradstab.2010.10.016
[290] IAEA. Trends in Radiation Sterilization of Health Care Products. 2008. http://www-pub.iaea.org/books/IAEABooks/7691/Trends-in-Radiation-Sterili.... Accessed 4 Sep 2017.
[291] Mazor E., Zilberman M.: Polym. Adv. Technol., 2017, 28, 565. https://doi.org/10.1002/pat.4054
[292] Ghafoor B., Mehmood M., Shahid U. et al.: Radiat. Phys. Chem., 2016, 125, 145. https://doi.org/10.1016/j.radphyschem.2016.04.004
[293] Gaston F., Dupuy N., Marque S. et al.: Radiat. Phys. Chem., 2016, 125, 115. https://doi.org/10.1016/j.radphyschem.2016.03.010
[294] Zhao W., Lu Y., Zhou L. et al.: J. Mater. Sci., 2016, 51, 7073. https://doi.org/10.1007/s10853-016-9875-x
[295] Šarac T., Quiévy N., Gusarov A., Konstantinović M.: Radiat. Phys. Chem., 2016, 125, 151. https://doi.org/10.1016/j.radphyschem.2016.03.024
[296] Jo S-Y., Park J-S., Gwon H-J. et al.: Radiat. Phys. Chem., 2012, 81, 846. https://doi.org/10.1016/j.radphyschem.2012.03.013
[297] Urbanek O., Pierini F., Choińska E. et al.: Polym. Compos., 2016, https://doi.org/10.1002/pc.24028
[298] Dai Y., Xia Y., Chen H-B. et al.: J. Bioact. Compat. Polym. Biomed. Appl., 2016, 31, 152. https://doi.org/10.1177/0883911515598795
[299] Zembouai I., Kaci M., Bruzaud S. et al.: Polym. Test., 2016, 49, 29. https://doi.org/10.1016/j.polymertesting.2015.11.003
[300] Escudero-Castellanos A., Ocampo-García B., Domínguez-García M. et al.: J. Mater. Sci. Mater. Med., 2016, 27, 176. https://doi.org/10.1007/s10856-016-5793-3
[301] Dai Z., Ronholm J., Tian Y. et al.: J. Tissue Eng., 2016, 7, 2041731416648810. https://doi.org/10.1177/2041731416648810
[302] Song C., Yoshii F., Kume T.: J. Macromol. Sci. A, 2001, 38, 961. https://doi.org/10.1081/MA-100104947
[303] Song J., Ren M., Song C. et al.: Polym. Int., 2004, 53, 1773. https://doi.org/10.1002/pi.1579
[304] Khan R., Dussault D., Salmieri S. et al.: J. Appl. Polym. Sci., 2013, 127, 3962. https://doi.org/10.1002/app.37715
[305] Augustine R., Saha A., Jayachandran V. et al.: Int. J. Polym. Mater. Polym. Biomater., 2015, 4, 526. https://doi.org/10.1080/00914037.2014.977900
[306] Luk J., Cooper-White J., Rintoul L. et al.: J. Mater. Chem. B, 2013, 1, 4171. https://doi.org/10.1039/c3tb20267d
[307] Jeong J-O., Jeong S., Shin Y. et al.: Polym. Korea, 2015, 39, 418. https://doi.org/10.7317/pk.2015.39.3.418
[308] Keles H., Naylor A., Clegg F., Sammon C.: Polym. Degrad. Stab., 2015, 119, 228. https://doi.org/10.1016/j.polymdegradstab.2015.04.025
[309] Martı́nez-Sancho C., Herrero-Vanrell R., Negro S.: J. Control. Release, 2004, 99, 41. https://doi.org/10.1016/j.jconrel.2004.06.004
[310] Simpson M., Gilmore B., Miller A. et al.: Rad. Phys. Chem., 2014, 94, 211. https://doi.org/10.1016/j.radphyschem.2013.09.002
[311] Chakoli A., He J., Chayjan M. et al.: RSC Adv., 2015, 5, 55544. https://doi.org/10.1039/C5RA08319B
[312] Shahabi S., Najafi F., Majdabadi A. et al.: Sci. World J., 2014, 2014, e420616. https://doi.org/10.1155/2014/420616
[313] Oliveira L., Araujo P., Araujo E.: Mater. Res., 2013, 16, 195. https://doi.org/10.1590/S1516-14392012005000173
[314] Khalil A., Albachir M., Odeh A.: Polycycl. Aromat. Compd., 2016, 36, 873. https://doi.org/10.1080/10406638.2015.1042551
[315] Liu Y., Zhai Y., Cao W. et al.: MATEC Web Conf., 2016, 67, 01004. https://doi.org/10.1051/matecconf/20166701004
[316] Igartua M., Hernández R., Rosas J. et al.: Eur. J. Pharm. Biopharm., 2008, 69, 519. https://doi.org/10.1016/j.ejpb.2007.12.014
[317] Desai K-GH., Kadous S., Schwendeman S.: Pharm. Res., 2013, 30, 1768. https://doi.org/10.1007/s11095-013-1019-2
[318] Fernandes-Cunha G., Rezende C., Mussel W. et al: J. Mater. Sci. Mater. Med., 2016, 27, 10. https://doi.org/10.1007/s10856-015-5621-1
[319] Bozdag S., Su H.: Il. Farm., 2002, 57, 55. https://doi.org/10.1016/S0014-827X(01)01171-5
[320] Ninaya Z., Hamid Z., Ahmad Z. et al.: Procedia Chem., 2016, 19, 373. https://doi.org/10.1016/j.proche.2016.03.026
[321] Erdemli Ö., Usanmaz A., Keskin D., Tezcaner A.: Colloid. Surface B, 2014, 117, 487. https://doi.org/10.1016/j.colsurfb.2014.01.037
[322] Keles H., Naylor A., Clegg F., Sammon C.: Vib. Spectrosc., 2014, 71, 76. https://doi.org/10.1016/j.vibspec.2014.01.012
[323] Thomarayil Mathew S., Devi Subbiah G., Viswanadhan Vasantha P., Balan V.: Curr. Drug Deliv., 2013, 10, 158. https://doi.org/10.2174/1567201811310020002
[324] Mohanan D., Gander B., Kündig T., Johansen P.: Eur. J. Pharm. Biopharm., 2012, 80, 274. https://doi.org/10.1016/j.ejpb.2011.10.007
[325] Sarigöl E., Pehlivan S., Ekizoğlu M. et al.: Pharm. Dev. Technol., 2017, 22, 706. https://doi.org/10.3109/10837450.2015.1102280
[326] Checa-Casalengua P., Jiang C., Bravo-Osuna I. et al.: Int. J. Pharm., 2012, 436, 545. https://doi.org/10.1016/j.ijpharm.2012.07.019
[327] Erdemli Ö., Keskin D., Tezcaner A.: Mater. Sci. Eng. C, 2015, 48, 391. https://doi.org/10.1016/j.msec.2014.12.044
[328] Dorati R., Genta I., Montanari L. et al.: J. Control. Release, 2005, 107, 78. https://doi.org/10.1016/j.jconrel.2005.05.029
[329] Igartua M., Hernández R., Rosas J. et al.: Eur. J. Pharm. Biopharm., 2008, 69, 519. https://doi.org/10.1016/j.ejpb.2007.12.014
[330] Selmin F., Puoci F., Parisi O. et al.: J. Funct. Biomater., 2015, 6, 1. https://doi.org/10.3390/jfb6010001
[331] Rajawat G., Shinde U., Nair H.: J. Drug Deliv. Sci. Technol., 2016, 35, 333. https://doi.org/10.1016/j.jddst.2016.08.006