1. JCCT
  2. All Volumes and Issues
  3. Volume 14, Number 3, 2020
  4. Formation Features of Tubular Products on the Basis of Composite Hydrogels

Formation Features of Tubular Products on the Basis of Composite Hydrogels

JCCT.
2020;
Volume 14, Number 3
: pp. 312 - 317
https://doi.org/10.23939/chcht14.03.312
Authors:
  1. Oleh Suberlyak
  2. Oleksandr Grytsenko
  3. Nataliia Baran
  4. Galyna Yatsulchak
  5. Bohdan Berezhnyy
1
Lviv Polytechnic National University
2
Lviv Polytechnic National University
3
Lviv Polytechnic National University
4
Lviv Polytechnic National University
5
Lviv Polytechnic National University

The method for obtaining composite hydrogel tubular products with the increased strength on the basis of copolymers of 2-hydroxyethylmethacrylate with polyvinylpyrrolidone has been developed. The method consists in the formation of hydrogel tubes with a subsequent precipitation from the solution into their outer surface of the reinforced layer based on polyamide, modified with polyvinylpyrrolidone. The obtained composite hydrogel tubes are characterized by the sufficient strength, resilience, elasticity, as well as the ability to withstand an internal pressure within 24‒43 kPa (180‒320 mm Hg).

hydrogels
hydrogel composites
polyamide
polyvinylpyrrolidone
vascular prostheses
  1. Popova I., Stepanova A., Sergeevichev D. et al.: Patologiya Krovoobrashcheniya i Kardiokhirurgiya, 2015, 19, 63.
  2. Khlif H., Ben Abdessalem S., Dhouib S., Sakli F.: Trends Appl. Sci. Res., 2011, 6, 1019. https://doi.org/10.3923/tasr.2011.1019.1027
  3. Marzougui S., Abdessalem S., Sakli F.: J. Appl. Sci., 2009, 9, 2794. https://doi.org/10.3923/jas.2009.2794.2800
  4. Grasl C., Bergmeister H., Stoiber M. et al.: J. Biomed. Mater. Res., 2010, 93, 716. https://doi.org/10.1002/jbm.a.32584
  5. Chlupác J., Filová E., Bacáková L.: Rozhledy, 2010, 89, 85.
  6. Khan S., Ullah A., Ullah K., Rehman N.: Des. Monomers Polym., 2016, 19, 456. https://doi.org/10.1080/15685551.2016.1169380
  7. Jumadilov T., Abilov Z., Kondaurov R. et al.: Chem. Chem. Technol., 2015, 9, 459. https://doi.org/10.23939/chcht09.04.459
  8. Gibas I., Janik H.: Chem. Chem. Technol., 2010, 4, 297.
  9. Suberlyak O., Skorokhoda V.: Hydrogels based on polyvinylpyrrolidone copolymers [in:] Haider S. and Haider A. (Eds.), Hydrogels. IntechOpen, London 2018, 136-214. https://doi.org/10.5772/intechopen.72082
  10. Suberlyak O., Baran N., Melnyk Y., Yatsulchak G.: Voprosy Khimii i Khimicheskoi Tekhnologii, 2018, 3, 121.
  11. Skorokhoda V.: Chem. Chem. Technol., 2010, 4, 191.
  12. Grytsenko O., Pokhmurska A., Suberliak S. et al.: East.-Eur. J. Enterprise Technol., 2018, 6/6, 6. https://doi.org/10.15587/1729-4061.2018.150690
  13. Montheard J., Chatzopoulos M., Chappard D.: J. Macromol. Sci., 1992, 32, 1. https://doi.org/10.1080/15321799208018377
  14. Yanez F., Concheiro A., Alvarez-Lorenzo C.: Eur. J. Pharm. Biopharm., 2008, 69, 1094. https://doi.org/10.1016/j.ejpb.2008.01.023
  15. Malešić N., Rusmirović J., Jovašević J. et al.: Tehnika, 2014, 69, 563. https://doi.org/10.5937/tehnika1404563M
  16. Prasitsilp M., Siriwittayakorn T., Molloy R. et al.: J. Mater. Sci.-Mater M., 2003, 14, 595. https://doi.org/10.1023/A:1024066806347
  17. Teodorescu M., Bercea M.: Polym.-Plastic Technol. Eng., 2015, 54, 923. https://doi.org/10.1080/03602559.2014.979506
  18. Reverberi A., Salerno M., Lauciello S., Fabiano B.: Materials, 2016, 9, 809. https://doi.org/10.3390/ma9100809
  19. Koczkur K., Mourdikoudis S., Polavarapu L., Skrabalak S.: Dalton Transact., 2015, 44, 17883. https://doi.org/10.1039/C5DT02964C
  20. Fan M., Zhang L., Wang R. et al.: Appl. Clay Sci., 2017, 144, 1. https://doi.org/10.1016/j.clay.2017.04.022
  21. Suberlyak O., Krasins'kyi V., Shapoval I, Hrytsenko O.: Mater. Sci., 2011, 46, 669. https://doi.org/10.1007/s11003-011-9339-z
  22. Suberlyak O., Krasinskiy V., Sikora J., Krzyzak A.: Chem. Chem. Technol., 2012, 6, 199. https://doi/org/10.23939/chcht06.02.199
  23. Suberlyak О., Baran N., Yatsul’chak H.: Mater. Sci., 2017, 53, 392. https://doi.org/10.1007/s11003-017-0087-6
  24. Suberlyak O., Grytsenko O., Hischak K., Hnatchuk N.: Chem. Chem. Technol., 2013, 7, 289. https://doi/org/10.23939/chcht07.03.289
  25. Roy N., Saha N.: PVP-based Hydrogels: Synthesis, Properties and Applications [in:] Câmara F., Ferreira L. (Eds.), Hydrogels: Synthesis, Characterization and Applications. Nova Science, Hauppauge, NY 2012, 227–252.
  26. Grytsenko O., Naumenko O., Suberlyak O. et al.: Voprosy Khimii i Khimicheskoi Tekhnologii, 2020, 1, 25. https://doi.org/10.32434/0321-4095-2020-128-1-25-32
  27. Suberlyak O., Grytsenko O., Kochubei V.: Chem. Chem. Technol., 2015, 9, 429. https://doi.org/10.23939/chcht09.04.429
  28. Suberlyak O., Hrytsenko O., Hischak Kh.: Mater. Sci., 2016, 52, 155. https://doi.org/10.1007/s11003-016-9938-9
  29. Sousa J., Antunes L., Mendes C. et al.: Angiologia e Cirurgia Vascular, 2014, 10, 52. https://doi.org/10.1016/S1646-706X(14)70050-3