The study on the effective radii of ultrasonic transducers for hydrophone calibration at the National State Primary Standard of the Unit of Ultrasonic Pressure in Water (NDETU AUV-02-2018) is presented and the appropriate method is described. The impact of the effective radius on measurement distance and diffraction loss coefficients is evaluated. The uncertainty calculation of the effective radius measurement of ultrasonic transducers is provided, and its influence on the accuracy of hydrophone calibration is assessed. Considerable attention is given to estimating the measurement distance between the hydrophone and the ultrasonic transducer, which significantly affects the accuracy of hydrophone calibration.
- W. Lee, Y. Roh, "Ultrasonic transducers for medical diagnostic imaging", Biomed. Eng. Lett., vol. 7, p. 91– 97, 2017, doi :10.1007/s13534-017-0021-8.
- J. Joseph, B. Ma, B. T. Khuri-Yakub, "Applications of Capacitive Micromachined Ultrasonic Transducers: A Comprehensive Review," IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, vol. 69, no. 2, pp. 456-467, 2022, doi: 10.1109/TUFFC.2021.3112917.
- X. Guangzhen, W. Volker, Y. Ping, "Review of field characterization techniques for high intensity therapeutic ultrasound", Metrologia, vol. 58, p. 22001, 2021, doi: 10.1088/1681-7575/abe02e.
- K. Ashhar, M. Noor-A-Rahim, M. O. Khyam, C. B. Soh, “A Narrowband Ultrasonic Ranging Method for Multiple Moving Sensor Nodes”. IEEE Sens. J., vol. 19, p. .6289-6297, 2019, doi: 10.1109/JSEN.2019.2909580.
- J. F. Tressler, Piezoelectric Transducer Designs for Sonar Applications. In: A. Safari, E. K. Akdoğan, (eds.) Piezoelectric and Acoustic Materials for Transducer Applications, Springer, Boston, 2008, pp. 217-239, doi: 10.1007/978-0-387-76540-2_11.
- S. H. Park, S. Choi, K. Y. Jhang, "Porosity Evaluation of Additively Manufactured Components Using Deep Learning-based Ultrasonic Nondestructive Testing", Int. J. Precis. Eng. Manuf. Green Technol., vol. 9, p. 395–407, 2021, doi: 10.1007/s40684-021-00319-6.
- R. Gupta, D. Mitchell, J. Blanche, S. Harper, W. Tang,K. Pancholi, L. Baines, D.G. Bucknall, D. Flynn, "A Review of Sensing Technologies for Non-Destructive Evaluation of Structural Composite Materials", J. Com- pos. Sci., vol. 5, p. 319, 2021, doi: 10.3390/jcs5120319.
- S. J. Kumar, A. Kamaraj, K. C. Sundaram, G. Shobana, G. Kirubakaran, "A comprehensive review on accuracy in ultrasonic flow measurement using reconfigurable systems and deep learning approaches", AIP Adv., vol. 10, p. 105221, 2020, doi: 10.1063/5.0022154.
- Z. Fang, R. Su, L. Hu, X. Fu, "A simple and easy- implemented time-of-flight determination method for liquid ultrasonic flow meters based on ultrasonic signal onset detection and multiple-zero-crossing technique", Measurement, vol. 168, p. 108398, 2021, doi: 10.1016/j.measurement.2020.108398.
- D. Duviriak, O. Shpak, V. Parakuda, “The standard of unit of ultrasonic pressure in aqueous medium”, ISTCMTM, Vol. 80, no. 3, p. 58-63, 2019, doi 10.23939/istcmtm2019.03.058.
- IEC 62127-2:2007 Ultrasonics - Hydrophones - Part 2: Calibration for ultrasonic fields up to 40 MHz, 2007, https://www.intertekinform.com/en-gb/Standards/IEC- 62127-2-1-2-564956_SAIG_IEC_IEC_1288934/.
- DSTU-N RMG 43:2006 Metrology. Application of the “Uncertainty Measurement Guidelines”, (RMG 43- 2001, IDT), 2006, https://online.budstandart. com/ua/catalog/doc-page.html?id_doc=77097.
- B. Fay, “ Numerical calculation of diffraction losses in the sound field of ultrasonic transducers” Acustica, vol. 36, pp. 209-213, 1976, https://ingentaconnect. com/content/dav/aaua/1976/00000036/00000003/art00 013?crawler=true.
- O. Shpak, D. Duviriak, V. Parakuda, I Kizlivskyi, “Experimental investigation on the effective radiating area of ultrasonic transducers with the aim of increasing the reproduction accuracy of the unit of ultrasonic pressure in water”, UMG, vol.1, pp. 44-50, 2022, doi: 10.24027/2306-7039.1.2022.258819.
- R. C. Chivers, L. Bosselaar, P. R. Filmore, “Effec- tive area to be used in diffraction corrections”, The Journal of the Acoustical Society of America, vol. 68, no. 1, p. 80–84, 1980, doi: 10.1121/1.384507.