An industrial necessity of creation of 100-Hz vibratory tables is grounded. The prospect of researches of just resonance electromagnetic vibratory tables is conditioned. The existing vibrating tables on the basis of electromagnetic drive are considered. It is noted that the stages and problems which arise during the creating of high-frequency two-mass vibration table of middle sizes constructed according to classic chart are oulined in the article. The principle scheme of an electromagnetic vibratory table which is to be developed is described. The basic analytical dependences for determining the coefficient of inflexibility of the resonance resilient system and hauling effort of the electromagnetic vibroexciters are obtained. The construction of the upper plate of vibrating table is grounded, and its first eigenfrequency is determmined in order to avoid the coincidence with its forced frequency. The construction of vibrating table is given: its spatial model is presented, and the general draft and the draft of the two-mass vibratory system are also given. The inertia parameters of the oscillating masses are determined. The parameters of stiffness and structural parameters of the resonance resilient system are determined. Checking of the resilient elements for durability is conducted. The parameters of stiffness and structural parameters of vibration isolators are determined. The results of calculation of vibroexciter, according to the hauling effort with the use of the specially developed program, are presented. The theoretical gain-frequency description of vibratory table and time dependences of motion of the oscillating masses are presented. The experimental gain-frequency description of vibratory table and time dependences of motion of the oscillating masses, which absolutely coincide with the theoretical, are presented.