The aim of the work was to investigate for the first time the possibility of modification of disperse mineral fillers (chalk and magnesium hydroxide) deodorizing shoulder straps containing fatty acids obtained by refining sunflower oil for create filled polymer composites. In the study of composites based on PVC found an increase in their tensile strength, strength reaches almost 50% increases. Accordingly, the relative elongation of these polymer composites increases. Shown to increase toughness with increasing content of modifier, with a greater increase in toughness for chalk than magnesium hydroxide for polyester resin composites. The maximum increase of toughness is more than 50%. Thermomechanical studies have shown that the heat resistance of composites mainly increases with modified fillers.
1. Zhuk, A. V. (1992). Mikroprotsessyi razrusheni-ya v dispersno-napolnenyih polimernyih materialah: аvtoref. dis. kand. him. nauk. Moskva, 22.
2. Shur, A. M. (1981). Vyisokomolekulyarnyie soedineniya: uchebnik dlya un-tov. 3-e izd., 470.
3. Bledzki, A. K., Izbicka, J., Gassan, J. (1995). Kunststoffe-Umwelt-Recycling. Stettin, Poland. 27-29 September, 43.
4. Chobit, M. R. (2007). Peroxide modification of the cellulose for synthesis of the compound polymer systems: Candidate's thesis. Lviv. (in Ukrainian).
5. Savelyev, Y., Gonchar, А., Travinskaya, Т. (2013). Monmorillonite modified with oligourethane ammonium chloride and based nanostructured polymers. American Journal of Nanoscience and Nanotechnology. 1(4), 87-93.: doi: 10.11648/j.nano.20130104.13.
https://doi.org/10.11648/j.nano.20130104.13
6. Savelyev, Yu. V., Gonchar, A. N. and Travinskaya, T. V. (2015). New Montmorillinite Modifier for Creation of Polyurethane Acrylate/Organoclay Nanocomposites by in situ Polymerization. J. Chem. Eng. Chem. Res., Vol. 2, No. 2, 511-552.
7. Pietrzak, L., Sowinski, P., Bojda, J., Piorkowska, E., & Galeski, A. (2016). Toughening of syndiotactic polypropylene with chalk. Journal of Applied Polymer Science, 133(28). doi:10.1002/app.43651.
https://doi.org/10.1002/app.43651
8. Voronov, S., Topkarev, V., Samaryk, V., Stetsyshyn, Yu., Roiter, Yu., Varvarenko, S., Nosova, N. (2003). Chemishe Modifizieung peroxidierter Polymerobeflächen für die Anwendung in der Medizin, Technomer, F 18, MT2(1)-MT2(11).
9. Mahesh, C., Kondapanaidu, B., Govindarajulu, K., Balakrishna, V. (Nov 2013). Experimental Investigation of Thermal and Mechanical Properties of Palmyra Fiber Reinforced Polyster Composites With and Without Chemical Treatment and Addition of Chalk Powder. International Journal of Engineering Trends and Technology (IJETT), V5 (5), 259-271.
10. Domka, L., Wąsicki, A., Kozak, M. (2003) The microstructure and mechanical properties of new HDPE-chalk composites. Physicochemical Problems of Mineral Processing, 37, 141-147.
11. Gurda, C., Jeffersona, B., Villa, R. (2019). Characterisation of food service establishment wastewater and its implication for treatment. Journal of Environmental Management, Vol. 252. doi: 10.1016/j.jenvman.2019. 109657.
https://doi.org/10.1016/j.jenvman.2019.109657
12. Chobit, M. R., Vasylyev, V. P., Kot ,V. A. (2015). Modyfikaciya krejdy roslynnymy' oliyamy. Visnyk Nacionalnogo universytetu "Lvivska politexnika", 812, 438-443.
13. Chobit, M. R., Vasylyev, V. P., Panchenko, Yu. V. (2017). Vykory'stannya vidxodiv oliyezhyrovoyi promyslovosti dlya modyfikaciyi mineralnyx napovnyuvachiv. Visnyk Nacionalnogo universytetu "Lvivska politexnika", 868, 318-325.
14. <http://www.kompozitservis.com/uploads/files/ public-folder/color_sim/220_PTLI.pdf>