Physico-mechanical properties of the products based on filled epoxy-oligomeric mixtures composed of Epidian-5 epoxy resin, oligoesteracrylate TGM-3 and monoperoxide derivative of Epidian-6 epoxy resin (PO) have been investigated. CaCO3 was used as a filler and polyethylene polyamine was a curing agent. The effect of PO and CaCO3 on the gel-fraction content and physico-mechanical properties was examined. Using a scanning electron microscopy (SEM) the morphology of the samples has been studied.
[1] Hetmanchuk Yu., Bratychak M.: Khimiya Vysokomoleculiarnykh Spoluk. Vyd-vo Lviv Polytechnic, Lviv 2008.
[2] Hetmanchuk Yu., Bratychak M.: Khimiya i Technologiya Oligomeriv. Vyd-vo Kyiv Univ., Кyiv 2008.
[3] Bratychak M., Bratychak Mykh.: Peroksydni Pohidni Epoksydnykh Smol. Vyd-vo Lviv Polytechnic, Lviv 2003.
[4] Ellis B.: Chemistry and Technology of Epoxy Resins. Blackie Academic and Professional, London 1993.
[5] Iatsyshyn O., Astakhova O., Shyshchak O. et al.: Chem. Chem. Technol., 2013, 7, 73. https://doi.org/10.23939/chcht07.01.073
[6] Bashta B., Astakhova O., Shyshchak O., Bratychak M..: Chem. Chem. Technol., 2014, 8, 309. https://doi.org/10.23939/chcht08.03.309
[7] Bratychak M., Ivashkiv O., Bruzdziak P. et al.: Polimery, 2016, 61, 316. https://doi.org/10.14314/polimery.2016.316
[8] Bratychak M., Kochubei V., Shust O. et al.: Chem. Chem. Technol., 2011, 5, 41.
[9] Poh C., Mariatti M., Ahmad M. et al.: J. Mater. Sci. Mater. Electron., 2014, 25, 2111. https://doi.org/10.1007/s10854-014-1847-9
[10] Ng C., Ash B., Schadler L. et al.: Adv. Compos. Lett., 2001, 10, 101. https://doi.org/10.1177/096369350101000301
[11] Ng C., Schadler L., Siegel R.: Nanostruct. Mater., 1999, 12, 507. https://doi.org/10.1016/S0965-9773(99)00170-1
[12] Tee D., Mariatti M., Azizan A. et al.: Compos. Sci. Technol., 2007, 67, 2584. https://doi.org/10.1016/j.compscitech.2006.12.007
[13] Shi G., Zhang M.-Q., Rong M.-Z. et al.: Wear, 2003, 254, 784. https://doi.org/10.1016/S0043-1648(03)00190-X
[14] Tang L.-C., Wan Y.-J., Yan D et al.: Carbon, 2013, 60, 16. https://doi.org/10.1016/j.carbon.2013.03.050
[15] Schueler R., Petermann J., Schulte K. et al.: J. Appl. Polym. Sci., 1997, 63, 1741. https://doi.org/10.1002/(SICI)1097-4628(19970328)63:13<1741::AID-APP5>3.0.CO;2-G
[16] Lee J.-Y., Shim M.-J., Kim S.-W.: Mater. Chem. Phys., 1997, 48, 36. https://doi.org/10.1016/S0254-0584(97)80073-9
[17] Leong Y., Abu Bakar M., Mohd Oshak Z. et al.: J. Appl. Polym. Sci., 2004, 91, 3315. https://doi.org/10.1002/app.13542
[18] Shi Q., Wang L., Yu H. et al.: Macromol. Mater. Eng., 2006, 291, 53. https://doi.org/10.1002/mame.200500223
[19] Mustata F., Tudirachi N., Rosu D.: Compos. Part B-Eng., 2012, 43, 702. https://doi.org/10.1016/j.compositesb.2011.11.047
[20] Yu H., Wang L., Shi Q. et al.: Prog. Org. Coat., 2006, 55, 296. https://doi.org/10.1016/j.porgcoat.2006.01.007
[21] He H., Li K., Wang J. et al.: Mater. Design, 2011, 32, 4521. https://doi.org/10.1016/j.matdes.2011.03.026
[22] Mohan T., Kanny K.: Compos. Part A-Appl. S., 2011, 42, 385. https://doi.org/10.1016/j.compositesa.2010.12.010
[23] Yung K., Zhu B., Yue T. et al.: Compos. Sci. Technol., 2009, 69, 260. https://doi.org/10.1016/j.compscitech.2008.10.014
[24] Yilmar M., Unal H., Mimaroglu A.: Express Polym. Lett., 2008, 2, 890. https://doi.org/10.3144/expresspolymlett.2008.104
[25] Astakhova O., Shved M., Zubal O. et al.: Chem. Chem. Technol., 2019, 13, 112. https://doi.org/10.23939/chcht13.01.112
[26] Ivanov V.: Rukovodstvo k Prakticheskim Rabotam po Khimii Polimerov. Izd-vo Leningrad. Univ., Leningrad 1982.