1. JCCT
  2. All Volumes and Issues
  3. Volume 14, Number 3, 2020
  4. Rubber Crumb Modified Bitumen Produced from Crude Oils Residuals of Ukrainian Deposits

Rubber Crumb Modified Bitumen Produced from Crude Oils Residuals of Ukrainian Deposits

JCCT.
2020;
Volume 14, Number 3
: pp. 420 - 425
https://doi.org/10.23939/chcht14.03.420
Authors:
  1. Andriy Nagurskyy
  2. Yurii Khlibyshyn
  3. Oleg Grynyshyn
  4. Viktoria Kochubei
1
Lviv Polytechnic National University
2
Lviv Polytechnic National University
3
Lviv Polytechnic National University
4
Lviv Polytechnic National University

The main regularities of the modification with a rubber crumb for bitumen produced from the residuals of crude oils of Ukrainian deposits have been studied. The thermal stability of the rubber crumb has been examined using the derivatograpgy. The mechanism of bitumen modification with the rubber crumb at low and high temperatures has been established. The influence of technological factors on the main quality indices of modified bitumen has been studied. The changes in the group composition of the original and modified bitumen were found.

bitumen
rubber crumb
group composition
derivatography
elasticity
softening point
  1. Gun R.: Neftianye Bitumy. Khimia, Moskva 1973.
  2. Kotov S., Tyshchenko V., Rudiak K. et al.: Mir Nefteproduktov, 2008, 4, 14.
  3. Grigoryeva O., Starostenko O., Fainleib A. et al.: Chem. Chem. Technol., 2012, 6, 59.
  4. Pyshyev S., Gunka V., Grytsenko Y., Bratychak M.: Chem. Chem. Technol., 2016, 10, 631. https://doi.org/10.23939/chcht10.04si.631
  5. Kavalov G.: Avtomobil. Dorogi, 2006, 6, 17.
  6. Fryder I., Pysh’yev S., Grynyshyn O.: Chem. Chem. Technol., 2013, 7, 105. https://doi.org/10.23939/chcht07.01.105
  7. Bratychak M., Chervinskyy T., Astakhova O., Shyshchak O.: Chem. Chem. Technol., 2010, 4, 325.
  8. Astakhova O., Shved M., Zubal O. et al.: Chem. Chem. Technol., 2019, 13, 112. https://doi.org/10.23939/chcht13.01.112
  9. Xie J.-X., Sun C.-Y., She Y.-C. et al.: Acta Petrolie Sinica (Petrol. Process. Sec.), 2008, 24, 74. http://www.syxbsyjg.com/EN/Y2008/V24/I1/74
  10. Masson J-F., Collins P., Woods J. et al.: [in:] Polymer Modified Bitumen. Properties and Characterisation. Woodhead Publ. Ser. in Civil and Structural Engineering 2011, 298-335. https://doi.org/10.1533/9780857093721.2.298
  11. Pyshyev S., Gunka V., Grytsenko Y. et al.: Int. J. Pavement Res. Technol., 2017, 10, 289. https://doi.org/10.1016/j.ijprt.2017.05.001
  12. Zolotariov V., Simonov A.: Avtoshliakhovyk Ukrainy, 2001, 3, 32.
  13. Nagurskyy A, Khlibyshyn Y., Grynyshyn O.: Chem. Chem. Technol., 2017, 11, 226. https://doi.org/10.23939/chcht11.02.226
  14. Nykulyshyn I., Pikh Z., Gnatush S. et al.: East-Eur. J. Adv. Technol., 2016, 2, 31.
  15. Gnativ Z., Rypka A., Nykulyshyn I. et al.: Chem. Chem. Technol., 2014, 8, 401. https://doi.org/10.23939/chcht08.04.401
  16. Khlibyshyn Yu., Pochapska I., Grynyshyn O., Gnativ Z.: Vopr. Khim. Khim. Technol., 2018, 5, 161.
  17. Rudenskyy A., Khromov A., Mariev V.: Dorogi Rosii XXI veka, 2004, 5, 62..
  18. Shikhaliev K., Ibragimova S., Bafadarova Z. et al.: Izv. Vuzov Azerbajdzhana, 2008, 6, 29.
  19. Nefteprodukty. Metody Ispytaniy. https://files.stroyinf.ru/Index2/1/4294746/4294746383.htm
  20. BS EN 1426:2000. European Standard. Bitumen and bituminous binders. Methods of tests for petroleum and its products. Determination of needle penetration.
  21. BS EN 1427:2007. European Standard. Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method.