The paper presents the results of simulation of the dynamic processes during gear cutting using the power skiving method. Oscillations in the elastic system of the machine tool have been studied using the Simulink Matlab system. The closed dynamic system is represented as a series-coupled connection of the elastic system of the cutting process and the elastic system of the machine tool, which is assumed to be two-mass, with masses applied to the table assembly with the workpiece and to the tool spindle. The input signals of the cutting process system – the thickness of a single tooth cut and the total chip thickness in continuous cutting – are modeled on the basis of a previously developed computer modeling system for this process. It is shown that the combination of these systems makes it possible to select the maximum permissible values of the cutting conditions that satisfy the condition of stable operation of the machine tool and maximum reduction of machining time.
- McCloskey P., Katz A., Berglind L., Erkorkmaz K., Ozturk E., Ismail F. Chip geometry and cutting forces in gear power skiving. CIRP Annals. 68 (1), 109–112 (2019).
- Ren Z., Fang Z., Arakane T., Kizaki T., Nishikawa T., Feng Y., Sugita N. Parametric modeling of uncut chip geometry for predicting crater wear in gear skiving. Journal of Materials Processing Technology. 290, 116973 (2021).
- Antoniadis A. Gear skiving — CAD simulation approach. Computer–Aided Design. 44 (7), 611–616 (2012).
- Tapoglou N. Calculation of non-deformed chip and gear geometry in power skiving using a CAD-based simulation. The International Journal of Advanced Manufacturing Technology. 100 (5), 1779–1785 (2019).
- Klocke F., Brecher C., Lцpenhaus C., Ganser P., Staudt J., Krömer M. Technological and simulative analysis of power skiving. Procedia Cirp. 50, 773–778 (2016).
- Klocke F., Brecher C. Zahnrad- und Getriebetechnik: Auslegung – Herstellung – Untersuchung – Simulation. Carl Hanser Verlag GmbH Co KG (2023).
- Guo E., Hong R., Huang X., Fang C. Research on the cutting mechanism of cylindrical gear power skiving. The International Journal of Advanced Manufacturing Technology. 79, 541–550 (2015).
- Schulze V., Kühlewein C., Autenrieth H. 3D-FEM modeling of gear skiving to investigate kinematics and chip formation mechanisms. Advanced Materials Research. 223, 46–55 (2011).
- Hrytsay I., Slipchuk A., Bosansky M. Justification of the Choice of Parameters for the Gear Power Skiving Operation Based on Computer Simulation. Strojnícky Çasopis – Journal of Mechanical Engineering. 73 (2), 33–44 (2023).
- Razzhyvin O. V., Subotin O. V. Zasoby avtomatyzatsiyi tekhnolohichnykh protsesiv. Kramators'k, DDMA. 147 (2017).
- Hrytsay I., Stupnytskyy V., Slipchuk A. Simulation of a Power Skiving Gear Cutting Process. Strojnícky Çasopis – Journal of Mechanical Engineering. 73 (1), 103–116 (2023).
- Hrytsay I., Slipchuk A., Bembenek M. Research on the characteristics of gear-cutting processes for external and internal meshing using the power skiving method. Ukrainian Journal of Mechanical Engineering and Materials Science. 9 (3), 31–39 (2023).