1. JCCT
  2. All Volumes and Issues
  3. Volume 14, Number 2, 2020
  4. Slurry Surfacing Mixes on the Basis of Bitumen Modified with Phenol-Cresol-Formaldehyde Resin

Slurry Surfacing Mixes on the Basis of Bitumen Modified with Phenol-Cresol-Formaldehyde Resin

JCCT.
2020;
Volume 14, Number 2
: pp. 251 - 256
https://doi.org/10.23939/chcht14.02.251
Authors:
  1. Yuriy Demchuk
  2. Volodymyr Gunka
  3. Serhiy Pyshyev
  4. Iurii Sidun
  5. Yurii Hrynchuk
  6. Justyna Kucinska-Lipka
  7. Michael Bratychak
1
Lviv Polytechnic National University, Danylo Halytsky Lviv National Medical University
2
Lviv Polytechnic National University
3
Lviv Polytechnic National University
4
Lviv Polytechnic National University
5
Institute of Chemistry and Chemical Technology Lviv Polytechnic National University
6
Department of Polymer Technology, Gdansk University of Technology
7
Lviv Polytechnic National University

Slow-breaking monophase cationic bitumen emulsions have been produced on the basis of bitumen modified with phenol-cresol-formaldehyde resin (PhCR-F). Bitumen emulsions were used as a binder for thin-layer coatings with slurry surfacing mixes (SSM). Physical and technical parameters of modified and unmodified emulsions were determined and analyzed. The optimal compositions of SSM were selected according to the breaking criterion. The values of SSM wet track abrasion were determined. It was found that the addition of PhCR-F allows to improve the adhesion properties of the thin-layer coatings.

bitumen emulsion
emulsifier
slurry surfacing mixes
thin-layer coating
modified bitumen
adhesion
phenol-cresol-formaldehyde resin
  1. Fang X., Garcia-Hernandez A., Lura P.: RILEM Techn. Lett., 2016, 10, 116. https://doi.org/10.21809/rilemtechlett.2016.23
  2. Al Nageim H., Al-Busaltan S., Atherton W. et al.: Construct. Build. Mater., 2012, 36, 743. https://doi.org/10.1016/j.conbuildmat.2012.06.032
  3. Al-Hdabi A., Al Nageim H., Seton L.: Construct. Build. Mater., 2014, 69, 362. https://doi.org/10.1016/j.conbuildmat.2014.07.081
  4. Boucard L., Schmitt V., Farcas F. et al.: Road Mater. Pavement Design, 2015, 16, 330. https://doi.org/10.1080/14680629.2015.1030910
  5. Thanaya I., Zoorob S., Forth J.: Proc. Inst. Civil Eng. Transport, 2009, 162, 47. https://doi.org/10.1680/tran.2009.162.1.47
  6. Sidun Iu., Solodkyy S., Vollis O.: J. Civil Eng., Environ., Architect., 2018, XXXV, 83. http://doi.prz.edu.pl/pl/pdf/biis/1063
  7. Pyshyev S., Grytsenko Y., Solodkyy S. et al.: Chem. Chem. Technol., 2015, 9, 359. https://doi.org/10.23939/chcht09.03.359
  8. Sidun Iu., Solodkyy S., Shved M, et al.: Chem. Chem. Technol., 2019, 13, 489. https://doi.org/10.23939/chcht13.04.489
  9. Sidun Iu., Vollis O., Solodkyy S. et al.: [in:] Blikharskyy Z., Koszelnik P., Mesaros P. (Eds.), Lecture Notes in Civil Engineering. CEE 2019: Proceedings of CEE 2019. Springer 2019, 47, 420. https://doi.org/10.1007/978-3-030-27011-7_53
  10. Demchuk Y., Sidun Iu., Gunka V. et al.: Chem. Chem. Technol., 2018, 12, 456. https://doi.org/10.23939/chcht12.04.456
  11. Pyshyev S., Demchuk Yu., Gunka V. et al.: Chem. Chem. Technol., 2019, 13, 212. https://doi.org/10.23939/chcht13.02.212
  12. Gunka V., Demchuk Yu., Pyshyev S. et al: Pet. Coal, 2018, 60, 1199.
  13. Pyshyev S.,Demchuk Y., Gunka V.: Uglekhim. Zh., 2019, 4, 27. https://doi.org/10.31081/1681-309X-2019-0-4-27-33
  14. EN 1426:2000. European Standard. Bitumen and bituminous binders. Methods of tests for petroleum and its products. Determination of needle penetration.
  15. EN 1427:2007. European Standard. Bitumen and bituminous binders. Determination of the softening point. Ring and Ball method.
  16. EN 13589:2008. European Standard. Bitumen and bituminous binders. Determination of the tensile properties of modified bitumen by the force ductility method.
  17. http://online.budstandart.com/ua/catalog/doc-page?id_doc=6392
  18.  http://online.budstandart.com/ua/catalog/doc-page.html?id_doc=4917
  19. EN 12593. European Standard. Bitumen and bituminous binders. Determination of the Fraas breaking point.
  20. EN 12591. European Standard. Bitumen and bituminous binders - Specifications for paving grade bitumens.
  21. ISSA A143. Recommended Performance Guideline For Micro Surfacing, 2010.
  22. ISSA Technical Bulletin 113. Test Method for Determining Mix Time for SSM Systems, 2017.
  23. ISSA Technical Bulletin 100. Laboratory Test Method for Wet Track Abrasion of SSM Systems, 2018.
  24. EN 12274-4. European Standard.Slurry surfacing. Test methods. Determination of cohesion of the mix.
  25. http://online.budstandart.com/ua/catalog/doc-page.html?id_doc=60842
  26. http://online.budstandart.com/ua/catalog/doc-page?id_doc=54091