1. All Authors
  2. Andrii Slipchuk

Andrii Slipchuk

Lviv Polytechnic National University

Articles published in Academic Journals of Lviv Polytechnic Publishing House

Investigation of Tool Temperature During the Cutting of Internal Gears Using the Power Skiving Method
Volume 58, 2024
DETERMINATION OF GEOMETRIC PARAMETERS OF UNDEFORMED CHIPS AT THE STAGE OF CUT IN DURING MULTI-PASS CUTTING OF THE INTERNAL GEAR BY POWER SKIVING
Vol. 10, No. 3, 2024
STUDY OF THE CUTTING FORCE BASED ON THE OBTAINED UNDEFORMED CHIPS DURING CUT IN WHEN MACHINING AN INTERNAL GEAR BY POWER SKIVING METHOD
Vol. 10, No. 2, 2024
Application of an integrated system of design and technological support for the production of drill bits
Volume 57, 2023
Simulation of the power skiving process for cutting an internal gear with modelling of undeformed chips
Volume 57, 2023
Study of the dynamic process in a nonlinear mathematical model of the transverse oscillations of a moving beam under perturbed boundary conditions
Volume 11, Number 1, 2024
DEFINITION OF THE GEOMETRIC PARAMETERS OF THE UNDEFORMED CHIP AT THE CUT-IN STAGE WHEN MACHINING AN EXTERNAL GEAR USING THE POWER SKIVING METHOD
Vol. 9, No. 4, 2023
THE POSSIBILITY OF USING STRUCTURAL DAMPING IN THE DESIGN OF A PREFABRICATED TURNING CUTTER TO REDUCE THE AMPLITUDE OF SELF-OSCILLATIONS IN THE PROCESS OF METAL CUTTING
Vol. 9, No. 4, 2023
RESEARCH ON THE CHARACTERISTICS OF GEAR-CUTTING PROCESSES FOR EXTERNAL AND INTERNAL MESHING USING THE POWER SKIVING METHOD
Volume 9, Number 3, 2023
STUDY OF DURABILITY IN THE CONNECTION “CONE-TUNGSTEN CARBIDE INSERT” FOR TENSION DEPENDENCE
Volume 9, Number 2, 2023
The Influence of Design and Technological Factors on the Durability of the Installed Carbide Explosion Equipment of Three-cone Drill Bits
Vol. 56, 2022
Power Skiving as a Modern Method of Cutting Gear Wheels and Features of Its Modeling
Vol. 56, 2022
Improvement in the construction of the “Tungsten carbide insert cutter - cone” joint for tricone drill bits
Volume 8, Number 3, 2022
Mechanisms of structural-phase transformations during crystallization of a solder melt
Volume 6, Number 3-4, 2020
The Influence of Technological Factors on the Reliability Connection for Tungsten Carbide Inset Cutter of Roller Cone Bits
Vol. 55, 2021
Modeling of “combined cutter - cone” connection in tricone drill bits
Volume 5, Number 3-4, 2019
Evaluation of the permissible moment in a roller cone drill bit providing the prescribed reliability of work
Volume 4, Number 1, 2018
Improving the Quality of the Technology of the Process When Preserving Tungsten Carbide Inset Cutter in the Cone
Volume 867, 2017
Improved Resilience Three Rolling Cutter Drill Using Cad / Cae-Systems
Volume 772, 2013
Improvement Technology Manufacturing Drill Bits With False Rock Cutting Rigging During the Design Process of Pressing Carbide Inserts in Milling
Volume 822, 2015
Designing New Product Line of Cutters for Development of Functional-oriented Technology of Their Manufacturing
Volume 839, 2016